• 35 ROUTER BIT SET - 1/2" CARBIDE BITS KIT Half Inch Shank ALUMINUM CASE - New

    35 ROUTER BIT SET - 1/2" CARBIDE BITS KIT Half Inch Shank ALUMINUM CASE - New This comprehensive set of Tungsten Carbide tipped bits should fulfill just about all needs. These router bits can be re-sharpened as necessary. Manufactured using sealed bearings, contained within a custom made aluminum carrying case with handle and twin clasp closures. Case dimensions: 12.75 x 9 x 2.75" Router bits are in SAE measurements: - Core Box R1/8, R1/4" - 90* V Grooving 1/2" - Round Nose R1/4" - Mortising 1/2" - Dovetail 1/2, 1/4" - Straight 1/8, 1/4, 3/98, 1/2, 3/4" - Panel Pilot 1/4" - Flush Trim 3/8x1/2", 3/8x1". 1/2x1/2", 1/2x1?, 3/4x1" - 45* Chamfer 1/2" - Cove R1/4, 3/8" - Rabbeting 1/4, 5/16, 3/8" - Classical Cove R5/16" - Mave Edge R3/16" - Beading R1/2" - Double Roman R3/16", R1/4" - Roman Ogee R5/32, 1/4," - Rounder Over R1/4, 3/8, 1/2" Their equivalents in metric are: - Straight;1/2" x 3.2mm/6.35mm/12.7mm/25.4mm/9.5mm/19mm - 90 V groove 1/2" x R3.2mm; - Core box 1/2" x 6.35mm; - Flush trim 1/2" x 9.5mm (2)/1/2 x 12.7mm/1/2" x 19mm 45 - Chamfer 1/2" x 30mm - Roman ogee 1/2" x R4mm/1/2 x R6.35mm Cove 1/2" x 6.35mm/1/2 x R9.5mm - Wave edge 1/2" x R4.76mm - Dove tail 1/2" x 12.7mm/1/2 x 14.3mm - Mortising 1/2" x 12.7mm - Pound nose 1/2" x R6.35mm 90 - V groove 1/2" x 12.7mm - Panel pilo...

    • Brand: EDMBG
    • ASIN: B001OBQ88C
    • UPC: 616932204616

  • Taytools 300006 Large Router Bit Guard for Router Table Fence 5-3/4" Wide x 3-1/2" High x 2" Diameter, Screws and Knobs Included

    This router bit guard severs as a physical barrier protecting fingers from spinning router bits. This guard is easy to mount directly to your router fence with included 1/4" x 20 hex head bolts and knobs. It easily adjusts up and down a full 3 inches. Overall size is 5-3/4" long by 3-1/2 inches high and 2" wide, perfect for larger router bits. It is made from 1/4" thick semi-transparent acrylic to allow visibility of your work yet provide maximal protection. Any bit guard should be larger than the router bit in use and adjusted as low as possible without interfering with the router bit or workpiece.

    • Brand: Taytools
    • ASIN: B078VVZF37
    • UPC: 700667471297

  • Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set

    Solid carbide flush trim. " With Ball Bearing: Flush Trim Bit: 1/2"" Corner Round Bit:3/4"" 45DegreeChamfer Bit: 1/2"" Cove Bit:1/2"" Roman Ogee Bit:5/16"" ".

    • Color: Original Version
    • Brand: Hiltex
    • ASIN: B000KSOOLI
    • UPC: 732454011881

  • Yonico 17150 15 Bit Router Bit Set 1/2-Inch Shank

    Great value starter set! This set contains 15 essential bits needed for the most common routing tasks making this the perfect set for beginners. This set also includes a beautiful solid wood storage case. The bits in this set are of the same top quality workmanship you have come to expect from Yonico router bits. All the bits in this set are C3 carbide tipped and have 1/2" shanks. Included bits: • 1/4" Dado Straight Bit • 3/8" Dado Straight Bit • 1/2" Dado Straight Bit • 1 x 1/2" Flush Trim Straight Bit • 1/2" X 3/4" Template Trim Bit • 14° Dovetail Joint Bit • 15° Bevel Trim Bit • 3/8" Roman Ogee Edging Bit • 45° Chamfer Edging Bit • 1/4" Radius Round Over Edging Bit • 1/2" Radius Round Over Edging Bit • 1/4" Radius Cove Edging Bit • 1/2" Radius Cove Edging Bit • 1/4" Slotting Bit • 1/2" Slotting Bit.

    • Brand: Yonico
    • ASIN: B002UH73BA
    • UPC: 765573827378

  • Grizzly H5543 Deluxe Roundover Inserts, 6-Piece

    This Super-Duty Round over Set features micro-grain carbide blades that are precision ground for razor sharpness high quality steel and full anti-kickback bodies.

    • Color: Not applicable
    • Brand: Grizzly
    • ASIN: B0000E3HWM
    • UPC: 690550155437

  • Router Bit Set-Up Jigs for 91991 Stile and Rail Router Bits

    Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more. All jigs are manufactured for 3/4" stock. They are made of durable HDPE and measure 2" x 3-7/8" x 3/4". (Jigs designed for rail-and-stile have the rail cut on one side and the stile cut on the opposing side.)

    • ASIN: B001I9WOD8

  • Carbide End Mill Cutter, EnPoint Single Flute CNC Milling Bit, 5/32" 4mm Shank 4mm Cut Dia 15mm Flute Length High Precision Aluminum Router Bit for Metalworking Woodworking Acrylic PVC MDF Color Plate

    Specification: 100% Brand new, never used, precision grinding Product Type: single flute end mill Material: solid carbide Shank diameter: 4mm(0.157 inch) Cutter diameter: 4mm(0.157 inch) Flute length: 15mm(0.591 inch) Overall length: 45mm(1.772 inches) Application: It is mainly used for the engraving and cutting of Aluminum, Acrylic, Medium Density Fiberboard, Corlor Plates and PVC etc.

    • Brand: EnPoint
    • ASIN: B018QP8KXY
    • UPC: 706795868497

  • NETGEAR (R8000-100NAS) Nighthawk X6 AC3200 Tri-Band WiFi Router, Gigabit Ethernet, Compatible with Amazon Echo/Alexa

    The netgear Nighthawk x6 AC3200 router, with breakthrough Tri-band WiFi delivers multiple bands for homes with many WiFi devices. Wifi speed up to 3.2Gbps and 6 high performance antennas provide maximum speed and range. Smart connect allows you to game, stream, and download mega-sized files without lags.. provides an extensible design that enables Service prioritization for data. Design that delivers high availability, scalability, and for maximum flexibility and price/performance. The country of Origin is China. WiFi Range - Very large homes

    • Color: black
    • Brand: NETGEAR
    • ASIN: B00KWHMR6G
    • UPC: 606449104363

  • Eagle America Eagle America 133-0402 45/15 Degree Signmaking/Veining Bit 2 Flute x 1/4" Shank

    Specially designed for tracing and routing out wood letters in signs and other intricate design work. Ideal for CNC routing. The long cutting length adds visual appeal to your letters. Solid carbide. USA.

    • Brand: Eagle America
    • ASIN: B00G3A2H0W
    • UPC: 748252245007

  • Comidox 1/4" Shank T-Slot Cutter End Mill Router Bits woodworking cutter, Keyhole knife Photo frame hanging hole knife Photo frame knife Scythe carving knife 2PCS

    Product description: This woodworking milling cutter used for wood perforation,spherical door tip installation,drawer tip,plastic products,wood,plywood,etc. For various processing methods, can be used as lock hole knife, key hole knife, picture frame hanging hole knife, photo frame knife, file knife, carving knife. Suitable for hand held electric drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. When the bottom is clean and precise to a hole, the woodworker can drill without passing through the material. Specifications: Material: Solid Hardened Steel Specifications: 1/4*1-3/8 Shank diameter:: 6.35mm Head diameter: 9.52mm Total length:46mm Weight:11g 1mm=0.039 Inch, 1pound = 450g. Note: The cutter is sharp enough,please get away from children. Please allow 1-2mm errors due to manual measurement. Package Includes: 2PCS

    • Brand: Comidox
    • ASIN: B07DR7SMBQ
    • UPC: 661083199595

  • Alfa AWUS036NHA Wireless B/G/N USB Adaptor - 802.11n - 150 Mbps - 2.4 GHz - 5 dBi Antenna - Long Range - Atheros Chipset - Windows XP/Vista 64-Bit/128-Bit Windows 7 Compatible

    Compatible with any brand 802.11g or 802.11n router using 2.4ghz wavelength and supports mimo (multiple input multiple output) high speed transfer TX data rate up to 150 mbps. awus036nha is an ieee 802.11b/g/n wireless USB adapter. It provides users to launch ieee 802.11b/g/n wireless network at 150 mbps in the 2.4 Ghz band, which is also compatible with ieee 802.11b/g wireless devices at 54 mbps. Awus036nha is compatible to higher-performance, multi-stream, mimo-based 802.11n and are available in reference designs to serve the networking, PC and consumer electronics markets. Awus036nha includes a convenient utility that scans for available networks on windows XP and saves preferred networks that users are usually connected with. Security encryption can also be configured by this utility. Compatibility: - any PC or laptop with a USB port, 733 MHz CPU and 64 MB memory - any brand 802.11g or 802.11n router using 2.4 Ghz wavelength - Windows 2000, 2003, XP home/pro/64-bit, vista 32-bit/64-bit, Windows 7 - not compatible with Xbox 360, ps3, Blu-Ray players, Roku boxes or any device that does not run an operating system. Also will not work with dual band routers that only broadcast n speeds on 5 Ghz wavelength - it is also not compatible with any Apple Mac . Security : This adapter pr...

    • Color: Black
    • Brand: Alfa
    • ASIN: B004Y6MIXS
    • UPC: 780746843115

  • Freud 1-3/4" (Dia.) Adjustable Tongue & Groove Bit Set with 1/2" Shank (99-036)

    • Color: Perma-SHIELD Coating Red
    • Brand: Freud
    • ASIN: B00006XMTT
    • UPC: 722208798663

  • LALICORP 1/4" Shank Extra Long Straight Router Bit Trimming Blade - 3/8" W x 2" H L15 BRAND NEW

    Features: Brand new and high quality 1/4" Shank with 3/8" Cutting Diameter and Extra Long 2" Blade Straight Router Bit C2 Carbide Tipped - Micro grain grade provides increased strength and utmost resistanceSpecification: Material: Carbide Cutters Shank Diameter: 6.35mm/1/4" Size: Approx. 9.52x85mm/0.375x3.35" Quantity: 1 Pc 1.Transition: 1cm=10mm=0.39inch 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Contents: 1 x Extra Long Straight Router Bit

    • Brand: LALICORP
    • ASIN: B07H2LQTTP

  • Linksys Max-Stream AC5400 MU-MIMO Tri-Band WiFi Router for Home (Fast Wireless WiFi Router, Gigabit Wireless Router)

    Next Gen AC2 Wi-Fi utilizes Multi-User MIMO technology to improve productivity in your home office while keeping your family's Wi-Fi devices online at the same time and the same speed. Refer to page 15 in User Manual for troubleshooting steps.

    • Color: Black
    • Brand: Linksys
    • ASIN: B017NT8Q24
    • UPC: 745883699834

  • NETGEAR Orbi Ultra-Performance Whole Home Mesh WiFi System - WiFi router and single satellite extender with speeds up to 3Gbps over 5,000 sq. feet, AC3000 (RBK50)

    FAST WHOLE HOME SYSTEM Bring fast, secure, and reliable internet to your entire family with the NETGEAR Orbi Home WiFi System. No more WiFi boosters or extenders necessary. The Orbi WiFi Router and Satellite extend high performance WiFi to your property from the basement to the backyard. The system smartly manages your WiFi so that each device's access is optimized and never interrupted. Up to 5,000 SQUARE FEET OF COVERAGE From the home office to the basement to the pool, this wireless internet system covers every inch of your home with a strong WiFi signal. Unlike router and repeater combinations, Orbi covers the whole home with a single WiFi network and name, enabling seamless indoor/outdoor and room-to-room connectivity. TRI-BAND TECHNOLOGY Award winning and patented Tri-Band Technology provides Orbi with a dedicated backhaul connection between the router and the satellite, so the system can manage multiple network connections without compromising speed. Watch movies and TV, play video games, download music, books, and more. QUICK & EASY SETUP Selected as Editors’ Choice by PC Magazine, Orbi works with your current internet service provider and sets up in minutes right out of the box. Use the Orbi app or any web browser to create your entire home’s secure WiFi ne...

    • Color: White
    • Brand: NETGEAR
    • ASIN: B01K4CZOBS
    • UPC: 606449116359

  • 67mm Router Bit High-Grade Welding Carbide Flush Trim Router Bit Upper & Lower Bearing 1x 1/4 Shank 6.35mm Woodworking Tool #LO

    Material:Carbide OverallLength:67mm Diameter:asshow Coating:TiCN Type:other Material::Carbide ShankDiameter::6.35mm(1/4") BearingDiameter::12.7mm(1/2") CuttingLength::25.45mm OverallLength::67mm

    • Brand: UTP
    • ASIN: B07FB9WCSD

  • Getting Started with CNC: Personal Digital Fabrication with Shapeoko and Other Computer-Controlled Routers (Make)

    Getting Started with CNC is the definitive introduction to working with affordable desktop and benchtop CNCs, written by the creator of the popular open hardware CNC, the Shapeoko. Accessible 3D printing introduced the masses to computer-controlled additive fabrication. But the flip side of that is subtractive fabrication: instead of adding material to create a shape like a 3D printer does, a CNC starts with a solid piece of material and takes away from it. Although inexpensive 3D printers can make great things with plastic, a CNC can carve highly durable pieces out of a block of aluminum, wood, and other materials. This book covers the fundamentals of designing for--and working with--affordable ($500-$3000) CNCs.

    • ASIN: B01MCZMK8G

  • Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

    Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

    • Color: Basic
    • Brand: Whiteside Router Bits
    • ASIN: B000K2BGNS
    • UPC: 722208798618

  • Transer 1/2 Inch Shank 2-1/2 Inch Diameter Carbide Alloy Bottom Cleaning Dado Surfacing Router Bit Woodworking Milling Cutter (Yellow)

    Package included: ☆1 x Router Bit

    • Color: Yellow
    • Brand: Transer
    • ASIN: B07JQQMWTF
    • UPC: 022879508777

  • Amazon Ethernet Adapter for Amazon Fire TV Devices

    • Color: BLACK
    • Brand: Amazon
    • ASIN: B074TC662N
    • UPC: 841667142869