• E-Z Lok Externally Threaded Insert, 303 Stainless Steel, 3/8"-16 Internal Threads, 9/16"-12 External Threads, 0.515" Length, Made in US (Pack of 5)

    E-Z LOK threaded inserts for metal provide an easy to use solution for repairing or reinforcing threaded holes in metal. Ideal for use in metals like aluminum and cast iron, E-Z LOK threaded inserts are screw machined out of solid steel for greater strength and superior pull out resistance. Standard external threads permit the use of standard drills and taps for installation. Once the hole is prepared, E-Z LOKs are threaded into the hole like an ordinary fastener using a screwdriver, bolt and jam nut, or optional E-Z LOK drive tool. E-Z LOKs are self locking and will not back out or vibrate loose. A preapplied adhesive activates upon installation and bonds to virtually all metals. Fastener-ready in minutes, the adhesive seals against liquids and gases to pressures of 6,000 psi. when fully cured (72 hours).

    • Brand: E-Z LOK
    • ASIN: B002KWJK5W
    • UPC: 839137000245

  • E-Z Lok Threaded Insert, Brass, Knife Thread, 1/4"-20 Internal Threads, 0.500" Length (Pack of 25)

    E-Z LOK Knife Thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Ideal for applications ranging from furniture to cabinetry to storm shutters, E-Z LOK Knife Threads are easily installed using a standard screwdriver or optional drive tool. Simply drill the appropriately sized hole and thread in the insert like an ordinary fastener. Proprietary external Knife Threads slice into hard wood, providing holding power superior to that of typical broad threads which crush wood during installation.

    • Brand: E-Z LOK
    • ASIN: B00207NF6W
    • UPC: 839137005004

  • E-Z Lok Threaded Insert, Brass, Knife Thread, 3/8"-16 Internal Threads, 0.625" Length (Pack of 10)

    E-Z LOK Knife Thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Ideal for applications ranging from furniture to cabinetry to storm shutters, E-Z LOK Knife Threads are easily installed using a standard screwdriver or optional drive tool. Simply drill the appropriately sized hole and thread in the insert like an ordinary fastener. Proprietary external Knife Threads slice into hard wood, providing holding power superior to that of typical broad threads which crush wood during installation.

    • Brand: E-Z LOK
    • ASIN: B0026GZU0Q
    • UPC: 839137005028

  • uxcell Furniture Chair Leveling Foot Square Pipe Insert 25 x 25mm 8 Sets

    The Leveling Foot is for office or household light duty furniture with threaded sockets.Plastic round base design will do no harm and scratches to your floors.Easy to install of it and adjustable height as your require.

    • Color: Black,silver Tone
    • Brand: uxcell
    • ASIN: B01KSZMFX6
    • UPC: 602451912354

  • E-Z LOK 400-4 Threaded Inserts for Wood, Installation Kit, Brass, Includes 1/4-20 Knife Thread Inserts (5), Drill, Installation Tool

    E-Z LOK Knife Thread inserts provide an easy to use solution for adding machine threads to wood. Ideal for use in virtually any wood (not recommended for plywood), these inserts use a proprietary external thread for superior holding power.

    • Brand: E-Z LOK
    • ASIN: B015CAPI54
    • UPC: 847554007433

  • E-Z Lok Threaded Insert, Zinc, Hex-Flush, 1/4"-20 Internal Threads, 0.789" Length (Pack of 50)

    E-Z LOK Hex Drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Ideal for use in materials such as pine, plywood, composition board, and MDF, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications.

    • Brand: E-Z LOK
    • ASIN: B002711TOG
    • UPC: 839137004632

  • Stainless Steel Guitar Bass Inserts for Bolt on Neck Tele Strat Premium DIY Kit

    What is included: Basic Kit: 4 Stainless Steel Inserts for Hardwoods with Precision 8-32Inside Machine Threads, Course Knife Edge Outside Threads 4 Stainless Steel Screws with Oval Phillips Head 8-32 Precision Machine Threads 1 Stainless Steel Basic Installation Tool Printed Directions Premium Kit: 4 Stainless Steel Inserts for Hardwoods with Precision 8-32 Inside Machine Threads, Course Knife Edge Outside Threads 4 Stainless Steel Screws with Oval Phillips Head 8-32 Precision Machine Threads 1 Premium Power Driver Installation Tool To be used with a variable speed drill Printed Directions What you need to install: #2 Phillips Head Screw Driver 1/4" Drill bit to drill neck 1/4" Drive Tool to install insert Small amount of soap to lubricate threads of inserts Important Install Notes: If you the buyer, are not comfortable with drilling the holes larger in your instruments neck, please have your local music store that services guitars install them for you. FCDS is not responsible or liable for any damage to any instrument that is a direct result of improper installation by the you the buyer. If you have a high end vintage graded instrument, drilling the neck to install these inserts may decrease the overall value. We strongly recommend that you drill and install one insert in a scra...

    • Brand: FCDS
    • ASIN: B00VCFW1UY

  • E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 1/4"-20 Internal Threads, 13mm Length (Pack of 100)

    E-Z LOK Hex Drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Ideal for use in materials such as pine, plywood, composition board, and MDF, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications.

    • Brand: E-Z LOK
    • ASIN: B002KT43MU
    • UPC: 839137004724

  • 10Pcs 307 Carbon Steel Self-tapping Threaded Insert Accessories Inner M61.0 Outer M101.25

    Specification: Condition: 100% Brand New Material: Carbon Steel(plating color zinc) Style: Inner M6*1.0 Outer M10*1.25 Weight: Approx. 24g / 0.8oz Length: Approx. 8mm / 0.3in Package List: 10Pcs Thread Inserts

    • Brand: Wal front
    • ASIN: B07L6D2JQC
    • UPC: 736077188050

  • E-Z Lok Threaded Insert, Zinc, Hex-Flush, 5/16"-18 Internal Threads, 0.789" Length (Pack of 50)

    E-Z LOK Hex Drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Ideal for use in materials such as pine, plywood, composition board, and MDF, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications.

    • Brand: E-Z LOK
    • ASIN: B002713X8G
    • UPC: 839137004649

  • 4 Pack Extra Long Pressure Gates Threaded Spindle Rods M10, Baby Kids Pet Dog Gates Accessory Screw Bolts Kit Fit for All Pressure Mounted Walk Thru Gates White

    ➤ A Perfect Replacement kit! This 4 pack of pressure gate spindle rods from FST is designed as a replacement kit for lost or damaged spindle rods (the threaded bolts that push against the wall to hold the gate in place), commonly used in walk through pressure mounted baby and pet safety gates. It fits for most place - such wall, stairs, wooden in most rooms - kitchen, balcony, bedroom, bathroom etc... ➤ Easy Installation without Tools ✪ Measure distance from gate to a wall, it has to be no more than 75 mm. ✪ Rotate the adjustment wheels along the threading, eliminating the gap between the adjustmet wheel and the rubber foot. ✪ Insert the 4 threaded spindle rods into the holes at each of the 4 corners of the gate. ✪ Position the gate so that it is level and centered within your doorway or opening. Rotate the adjustment wheels on the threaded spindle rods in the opposite direction, expanding the gap between the rubber foot and the adjustment wheel. ✪ Expand each of the 4 threaded spindle rods until they make contact with the doorway or opening. Do not fully tighten the threaded spindle rods yet. ➤ Note Please Make sure the hole can insert M10 bolts (10mm) before you purchase.M10 only fits gates with a 10mm diameter opening. Baby gate or wall saver pads in this...

    • Color: White
    • Brand: FST
    • ASIN: B07KXF9GG2

  • ProFurnitureParts 4 Pack Black Plastic Corner Bracket Brace with 5/16 Threaded Insert (corner leg bracket for couch, sofa ottoman or table

    ProFurnitureParts 4 Pack Black Plastic Corner Bracket Brace with 5/16" Threaded Insert (corner leg bracket for couch, sofa ottoman or table) SCREWS NOT INCLUDED- NO HARDWARE Heavy Duty Composite Plastic This is attached to furniture with 4 screws (NOT INCLUDED) and leg is then screwed into the corner block Includes 5/16" Threaded insert for standard American 5/16" hanger bolts Easy to Install Listing By ProFurnitureParts

    • Brand: ProFurnitureParts
    • ASIN: B079KKZPRF
    • UPC: 781861960398

  • E-Z Lok Threaded Insert, Zinc, Hex-Flanged, 3/8"-16 Internal Threads, 25mm Length (Pack of 25)

    E-Z LOK Hex Drive inserts for soft wood are an inexpensive insert for use in ready-to-assemble furniture, drawer pulls, or wherever the avoidance of thread stripping is desired. Ideal for use in materials such as pine, plywood, composition board, and MDF, Hex Drive inserts feature tapered external threads which resist pull out caused by vibration. These die-cast zinc inserts are available in a flush design for "below the surface" installation or in a flanged design for installation depth limiting applications.

    • Brand: E-Z LOK
    • ASIN: B002WC8TVG
    • UPC: 839137004762

  • Dee Zee DZ43301 Truck Tailgate Assist

    This Fits: Dodge Ram 1500 Pickup 2009 - 2010 Sport , Dodge Ram 1500 Pickup 2009 - 2010 Laramie , Dodge Ram 1500 Pickup 2009 - 2010 SLT , Dodge Ram 1500 Pickup 2009 - 2010 ST , Dodge Ram 1500 Pickup 2009 - 2010 TRX , Dodge Ram 1500 Pickup 2009 - 2010 TRX4 , Ram 1500 2011 - 2014 Sport , Ram 1500 2011 - 2014 Laramie , Ram 1500 2011 - 2014 Outdoorsman , Ram 1500 2011 - 2014 Big Horn , Ram 1500 2013 - 2014 Express , Ram 1500 2011 - 2014 Laramie Longhorn , Ram 1500 2011 - 2014 SLT , Ram 1500 2013 - 2014 HFE , Ram 1500 2013 - 2014 Laramie Limited , Ram 1500 2013 - 2013 R/T , Ram 1500 2014 - 2014 Special Service , Ram 1500 2011 - 2014 ST , Ram 1500 2011 - 2014 SXT , Ram 1500 2011 - 2014 Tradesman , Ram 1500 2012 - 2012 Tradesman HD , Ram Pickup 1500 2012 - 2012 Outdoorsman

    • Color: Black
    • Brand: Dee Zee
    • ASIN: B00GUF74HQ
    • UPC: 019023988363

  • Threaded Fasteners - 150pcs M3-M8 Stainless Steel Ss304 Coiled Wire, Helical Screw Thread Inserts,Safety Fastener

    Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread.Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition.Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance.It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance.Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss. Steel thread inserts can effectively improve screw connection, greatly improving the reliability. Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage.Specification:Material: Stainless steel 304Size (inner diameter*installed pitch*installed length) & Quantity:M3*0.5*1.5D (20PCS)M4*0.7*1.5D (20PCS)M5*0.8*1.5 D (20PCS)M6*1*1.5D (10PCS)M8*1.25*1.5D (5PCS...

    • Brand: Jadeshay
    • ASIN: B07JP2QR2X
    • UPC: 749712494706

  • 12g 1 inch Threaded Taper with 1.2mm Threading

    12g 1 inch Threaded Taper with 1.2mm Threading Taper is 12g at its thickest point and has a 1.2mmx2.0mm thread on the end. Use these to insert internally threaded jewelry or better yet. Buy 1" piercing needles, and use this to install internal jewelry in 1 simple motion. The size of the taper is the thickest part. Measures 1 inches long (25mm long) Made from 316L Stainless Steel. These are Autoclave safe.

    • Brand: Pierced Tools
    • ASIN: B00C2S0210
    • UPC: 644287719868

  • #4-40 x 0.135" Qty 50 Threaded Heat-Set Inserts used for connecting 3D printed and injection molded parts.

    If you've done 3D printing, then you most likely have tried to connect some parts. Perhaps it's an enclosure for an electronics project and mounting a circuit board to protect it. Maybe it's a robotics or RC car project. Alternatively, you might be a professional architect or engineer modeling a prototype product. Using screws to tap straight into plastic might work once if the connection does not need to be too strong and doesn't have to come apart. If you ever need to disassemble and reassemble multiple times, then you need to raise your game to include brass heat-set inserts. Brass inserts have small threads inside that hold #4-40 machine screws tightly. They have ridges and bumps on the outside to allow the melted plastic to wrap around, holding the insert tight into the plastic piece. Using a soldering iron with a special installation tip (search Amazon for B078K72615 or B07GNX86BB) makes it easy to install the inserts and extract the heated tip consistently without pulling the insert out of the plastic and ruining the part. Once the insert is installed you will have a much more robust and reusable way to connect 3D printed parts.

    • Color: Brass
    • Brand: Virtjoule
    • ASIN: B07BH5X252
    • UPC: 040232227240

  • Caldwell Ballistic Precision Chronograph with FPS and MPS Readings, Sun Screens and Large LCD Screen for Range Shooting

    The Ballistic Precision Chronograph provides accurate velocity measurements across a wide range of shooting conditions. This Chrono has the ability to provide much better accuracy than other chronographs on the market (+/-.25%). Although technologically advanced, the unit is designed to be simple to operate, displaying velocity in Feet per second or Meters per second on the large built in LCD screen. The Chrono can also deliver the shot string velocity data through the 15' foot audio jack cable (included) to an iPhone or iPad. A free App is available for download that displays the velocity of each shot on the phone screen and records it with other data identifying the load and environmental conditions. The data is stored and can be exported via Email or simply recalled for reference at a later date. Measures from 5 to 9,999 FPS. There is a 1/4-20 threaded insert on bottom of housing for tripod mounting, operates on a 9 Volt battery (not included). Each unit factory calibrated to within +/- 0.25% accuracy Ideal for Firearms, Archery, Airgun and Paintball Simple operation, large LCD screen Meters Per Second (MPS) or Feet Per Second (FPS) readings Extra wide sun screens for added shading in full sun operation Option to interface with Smartphone via included 15' audio jack cable App ...

    • Color: Green
    • Brand: Caldwell
    • ASIN: B00HTN5DTE
    • UPC: 757183537808

  • VonHaus Speaker Mounts, Park of 2, Black Universal Wall Mount Speaker Brackets, 7.7lb Weight Capacity, Swivel & Tilt, Includes Fitting Hardware

    This pair of VonHaus Black Universal Wall Mount Speaker Brackets are for mounting Home cinema/Satellite style speakers onto your wall. These speaker brackets are easy to install and come complete with an install kit (including screws for most speakers). The speaker brackets have a Swivel & Tilt mechanism to allow adjustment for optimum listening angle & sound direction. Speakers must have 1 single threaded screw-hole in order to fit these speaker brackets. Each speaker bracket has a weight capacity of 7.7lb. These speaker brackets can also be used for speakers with keyhole fittings, but unfortunately the fixings are not included with the product. Speakers come in a two pack and are coated in a tough black plastic finish.

    • Color: Black
    • Brand: VonHaus
    • ASIN: B00OCGC7G8