• Drill America 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wooden Case

    6 Piece Carbon Steel NPT Pipe Tap Set with Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads Also called 'pipe taps', National pipe taper taps are appropriate for Threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the Tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. Not threads require the use of a “sealer” like Teflon tape or pipe compound.

    • Color: Uncoated (Bright)
    • Brand: Drill America
    • ASIN: B07B7SNCJ7
    • UPC: 887861241595

  • Century Drill & Tool 97207 High Carbon Steel National Pipe Tap, 1-1/4-11 1/2 NPT

    Century's national pipe thread taps offer precision cut threads, accurately formed for consistent, exact threading.

    • Brand: Century Drill & Tool
    • ASIN: B00BEZWEMC
    • UPC: 081838972073

  • Everflow BRSP0014-NL 1/4-Inch Male National Pipe Taper Threads Brass Solid Plug with Square Head, Lead Free Brass Pipe Fitting, Higher Corrosion Resistance Economical & Easy to Install

    The Everflow Supplies 1/4 inch brass square head Solid plug is a class 125 lb. applications lead free brass pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. The plug inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads, and it has a square head for increased leverage and use with a wrench during installation and disassembly. Lead-free brass is comparable in strength to stainless steel and is more corrosion resistant. Brass finished plumbing fitting, made from premium materials, this plumbing fitting offers great function and value for your home. This class 125 fitting meets standard ASTM B-584-06 for lead-free quality assurance and it's certified to meet NSF/ANSI 61-G standard for quality assurance.

    • Brand: Everflow Supplies
    • ASIN: B00N2SHBMC
    • UPC: 804595993903

  • MaxTool 1/8"-27 NPT Tap (National Pipe Taper Tap); Quality High Speed Steel HSS M2; Fully Ground; NP02W00R008

    MaxTool NPT Taps are made of Premium High Speed Steel M2, which meet National Pipe Taper (NPT) standard, and apply to cut internal threads in pipes; Ideal for pipe fittings and whenever an extremely tight fit is required. Fully ground threads and flutes make taps sharp, fast tapping and have outstanding center accuracy. The good surface Treatment and Multi-Flute design ensure smooth and easy chip ejection. Superior HSS M2 and Super Hardness (HRC63-66) guarantee to resist abrasion and long tool life. MaxTool Taps can be used in a wide range, such as lathes, drill presses, and hand-held drills, etc. All items are carefully inspected before listing to ensure that MaxTool only offer consistent quality productsMaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and moreMaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We off...

    • Color: Bright Surface finish
    • Brand: MaxTool
    • ASIN: B079NNNVWZ
    • UPC: 634301934728

  • Everflow BRPL0100-NL 1-Inch Male National Pipe Taper Threads Brass Cored Plug with Square Head, Lead Free Brass Pipe Fitting, Higher Corrosion Resistance, Economical & Easy to Install

    The Everflow Supplies 1 inch brass square head cored plug is a class 125 lead free brass pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. The plug inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads, and it has a square head for increased leverage and use with a wrench during installation and disassembly. Lead-free brass is comparable in strength to stainless steel and is more corrosion resistant. Brass finished plumbing fitting, made from premium materials, this plumbing fitting offers great function and value for your home. This class 125 fitting meets standard ASTM B-584-06 for lead-free quality assurance and it's certified to meet NSF/ANSI 61-G standard for quality assurance.

    • Brand: Everflow Supplies
    • ASIN: B00N2SH8NE
    • UPC: 804595993828

  • Ratchet Pipe Threader- 6 Piece Die Pipe Threading Set, NPT ½” to 1¼” Cutting Tool For All Kinds Of Pipes, a U.S. Solid Product

    Description: The U.S. Solid Ratchet Pipe Threader Set will easily thread your pipes to the national pipe thread standard. National pipe thread, also known as NPT, is the United States standard for threading pipes. This means that this tool will allow you to thread pipes to match and screw into the existing pipes in your house. It is made from the highest quality heavy duty materials, making it virtually indestructible. This tool is manually operated and simple to use. Insert the pipe into the die and use the ratchet to make your way around the pipe. Make sure that you stop threading once the pipe has reached the end of the die. The U.S. Solid Ratchet Pipe Threader will give your pipes a tight fit and a watertight seal. Sizes ¼" ⅜" ½" ¾" 1" 1 ¼"

    • Brand: U.S. Solid
    • ASIN: B07553H7RZ
    • UPC: 888107085485

  • Kodiak USA Made 1/8-27 NPT Extension Pipe Tap 6” Overall Length 4 Flute - Ground Threads High Speed Steel Pipe Tap - NPT National Taper Pipe Thread Extension Tap

    1/8-27 NPT Extension Pipe Tap 6" Overall Length 4 Flute Pipe Tap - NPT National Taper Pipe Thread Extension Tap.

    • Brand: Kodiak Cutting Tools
    • ASIN: B007BTRFVA

  • Everflow BRPL0012-NL 1/2-Inch Male National Pipe Taper Threads Brass Cored Plug with Square Head, Lead Free Brass Pipe Fitting, Higher Corrosion Resistance, Economical & Easy to Install

    The Everflow Supplies 1/2 inch brass square head cored plug is a class 125 lead free brass pipe fitting with male National Pipe Taper (NPT) threads for closing the end of a pipe. The plug inserts into female pipes or fittings and connects with NPT threads, which create a tighter seal than straight threads, and it has a square head for increased leverage and use with a wrench during installation and disassembly. Lead-free brass is comparable in strength to stainless steel and is more corrosion resistant. Brass finished plumbing fitting, made from premium materials, this plumbing fitting offers great function and value for your home. This class 125 fitting meets standard ASTM B-584-06 for lead-free quality assurance and it's certified to meet NSF/ANSI 61-G standard for quality assurance.

    • Brand: Everflow Supplies
    • ASIN: B00N2SH8U2
    • UPC: 804595993804

  • Drill America 1/2"-14 NPT Pipe Tap, Carbon Steel, DWTPT Series

    Drill America DWTPT series Qualtech carbon steel pipe tap is designed to clean and/or re-thread damaged or jam pipe threads. It is appropriate for threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.

    • Brand: Drill America
    • ASIN: B01DZD1TLM
    • UPC: 887861076296

  • MaxTool 1/16"-27 NPT Tap (National Pipe Taper Tap); Quality High Speed Steel HSS M2; Fully Ground; NP02W00R004

    MaxTool NPT Taps are made of Premium High Speed Steel M2, which meet National Pipe Taper (NPT) standard, and apply to cut internal threads in pipes; Ideal for pipe fittings and whenever an extremely tight fit is required. Fully ground threads and flutes make taps sharp, fast tapping and have outstanding center accuracy. The good surface Treatment and Multi-Flute design ensure smooth and easy chip ejection. Superior HSS M2 and Super Hardness (HRC63-66) guarantee to resist abrasion and long tool life. MaxTool Taps can be used in a wide range, such as lathes, drill presses, and hand-held drills, etc. All items are carefully inspected before listing to ensure that MaxTool only offer consistent quality productsMaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and moreMaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We off...

    • Color: Bright Surface finish
    • Brand: MAXTOOL
    • ASIN: B079NQ5Q5K
    • UPC: 634301934711

  • Kodiak Cutting Tools KCT212045 USA Made 1/8-27 NPT Taper Pipe Threading Tap for National Pipe Taper Threads, Ground Threads, High Speed Steel, 4 Flute, .4375" Shank, 3/4" Thread Length, 2-1/8" Overall Length

    1/8-27 NPT Taper Pipe Tap .4375" Shank 3/4 Thread Length 2-1/8" Overall Length 4 Flute Pipe Threading Tap for National Pipe Taper Threads.

    • Brand: Kodiak Cutting Tools
    • ASIN: B0070YZ07W

  • Drill America 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set 1/4", 3/8", 1/2", 3/4", 1" and 1-1/4" in Wooden Case

    6 Piece Carbon Steel NPT Pipe Tap Set with Sizes 1/4", 3/8", 1/2", 3/4", 1" and 1-1/4" in Wood Case Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads Also called 'pipe taps', National pipe taper taps are appropriate for Threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the Tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. Not threads require the use of a “sealer” like Teflon tape or pipe compound.

    • Color: Uncoated (Bright)
    • Brand: Drill America
    • ASIN: B07B7PL8SW
    • UPC: 887861241618

  • Vermont American 20372 1/4-Inch to 18 National Pipe Taper High Carbon Steel Pipe Taps

    Vermont American 20372 Pipe Tap 1/4-18Npt

    • Brand: Vermont American
    • ASIN: B0002YUWLQ
    • UPC: 013317020265

  • Irwin Industrial Tools 1921ZR Taper Pipe Tap Set, 6-Piece

    Features and Benefits: cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped ideal for pipe fittings tapered at a rate of 3/4" per foot comes in a Plastic case set includes one taper tap each of: 1/8" - 27 npt 1/4" - 18 npt 3/8" - 18 npt 1/2" - 14 npt 3/4" - 14 npt 1" - 11-1/2 npt.

    • Brand: Irwin
    • ASIN: B001AD1WJ4
    • UPC: 042526019210

  • Alfa Tools TDS66006NPT 6 Pc Carbon Steel Npt Pipe Tap Set,

    Alfa Tools tap and die sets. 6 -piece carbon steel NPT pipe tap set. Includes: 6 NPT pipe taps. Size and threads per inch (NPT sizes): 1/4-18, 3/8-18, 1/2-14, 3/4-14, 1-11-1/2, 1-1/4-1-1/2

    • Brand: Alfa Tools
    • ASIN: B01LZVJV6N
    • UPC: 721511002276

  • CAMPBELL HAUSFELD GR001500AJ .675" or 3/8" NPT (National Pipe Thread) Compressor Drain Cock

    3/8" NPT compressor tank drain cock, fits mostly 2 stage compressors.

    • Color: Plain
    • Brand: Campbell Hausfeld
    • ASIN: B000ND42EY
    • UPC: 045564204150

  • CMT 3/4" - 14 NPT PIPE TAP 88-0034

    Cuts internal threads in pipes; Nominal size of the tap is that of the pipe fitting being tapped; Available in National Pipe Taper (NPT); Ideal for pipe fittings; Specifications: Cuts intragroup threads in pipes; 3/4" - 14 NPT; Nominal sizing of the tap is the sizing of the pipe meet existence abroach; Thread Standard = NPT; No. of Flutes = 4; Outside Cutting Direction = Right; Style = Taper; Applicable Materials = Most Metals; Material = High Carbon Steel

    • Brand: CMT
    • ASIN: B00I3P4R3K
    • UPC: 852672969051

  • Hanson 1903ZR Tap 1/4"-18Npt Taper, for Tap Die Extraction

    These IRWIN HANSON Pipe Taper Taps cut internal threads in pipes. Each taper tap is great for pipe fittings and is tapered at a rate of 3/4 inches per foot.

    • Brand: Lenox Tools
    • ASIN: B00B7421BE
    • UPC: 042526019036

  • RIDGID 47750 Threading Machine Dies, Right-Handed Alloy NPT Pipe Dies with Nominal Pipe Size of 1-Inch to 2-Inches for Universal Die Heads

    47750 Dies, Univ 1-2 Npt. This item is used for Handtools & Tool Organizers ,Other Hand Tools. This product manufacture by United States.

    • Brand: Ridgid
    • ASIN: B001AHXWY8
    • UPC: 636123665033

  • CMT 1-1/2" - 11.5 NPT PIPE TAP 88-0112

    Cuts internal threads in pipes; Nominal size of the tap is that of the pipe fitting being tapped; Available in National Pipe Taper (NPT); Ideal for pipe fittings; Specifications: Cuts intragroup threads in pipes; 1-1/2" - 11.5 NPT; Nominal sizing of the tap is the sizing of the pipe meet existence abroach; Thread Standard = NPT; No. of Flutes = 6; Outside Cutting Direction = Right; Style = Taper; Applicable Materials = Most Metals; Material = High Carbon Steel

    • Brand: CMT
    • ASIN: B00I3PGCA6
    • UPC: 852672969099