• Rousseau 3509 9-Inch x 12-Inch x 3/8-Inch Deluxe Router Base Plate

    Able to accommodate the heaviest routers, this thermoset 3/8-inch base plate measures 9 by 12-inches with a 1/4-by-1/2-inch lip, and allows mounting in 3/4-inch tops. Two rings snap out to accommodate larger router bits up to 3-3/4-inches with opening sizes of 1-1/4 (designed to fit template guides), 2-5/8, and 3-7/8-inches. The shoulder pin can be used in any of five locations for ease in starting freehand work.

    • Brand: Rousseau
    • ASIN: B00002242B
    • UPC: 725825350900

  • Big Horn 18101 9-Inch x 12-Inch Router Table Insert Plate with Guide Pin & Snap Rings

    Big Horn 9-Inch x 12-Inch x 3/8-Inch Deluxe Router Base Plate. Inverting your router in a router table allows for safer and more versatile operations. Our deluxe router table insert is made from reinforced high pressure plastic. Large 9" x 12"x 3/8" thick design accommodates heavy routers and features Snap Out Rings for different size opening for various size cutters. The shoulder pin (included) allows for easy free hand work for molding, styles, rails and miters. Also comes with Cam Action Adjusters for snugging the plate to the table and eliminating side to side movement and locking it in place. Threaded Allen wrench inserts in each corner help you level and easily adjust the router insert with your table. Recessed edges along bottom of baseplate allow a nice sturdy fitting. Comes with four magnets for each corner.

    • Color: Black
    • Brand: Big Horn
    • ASIN: B01F43HLA4
    • UPC: 733353088929

  • KREG Molded Router Table Insert Plate for Porter-Cable Routers

    This Kreg router table insert plate is made from compression molded phenolic material that won't sag even under the weight of the heaviest of routers. It is designed to use Level-Loc Reducing Rings that install in seconds and lock in place every time. They make setup changes simple by allowing you to quickly swap inserts rings for different bit sizes. The 3-hole plate for PC690/890 will accommodate those same routers from Porter-Cable as well as Bosch 1617 series and DeWalt 616/618 series.

    • Brand: Kreg
    • ASIN: B01M2X1447
    • UPC: 647096806873

  • KREG Molded Router Table Insert Plate Blank, for All Routers

    This Kreg Table Insert Plate Blank for Routers is made from compression molded phenolic material so it won't sag even under the weight of a heavy router. Designed to use Level-Loc Reducing Rings that install in seconds and lock in place flush every time. They make setup changes simple by allowing you to quickly swap inserts rings for different bit sizes. A blank version comes without predrilled router-mounting holes, and features alignment marks on the underside that make it easy to center and mount any router.

    • Brand: Kreg
    • ASIN: B01M5B613B
    • UPC: 647096806897

  • Router Table Insert Plate, 9.3''x4.7''x 0.3'' Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches

    Description: Our Router Table Insert Plate is made of aluminium alloy, durable in use and not easy to rust. Convenient center-hole bushing used to align the router so it is centered in the bit hole. It is easy to use and make the work be well done. Specification: Condition: 100% Brand new and high quality Material: Aluminium alloy plate, plastic rings Color: As picture shown Size: Approx. 235mm * 120mm * 8mm/9.3'' * 4.7'' * 0.3'' Weight: Approx. 577g Package Included: 1 * Router Table Insert Plate 4 * Router Insert Rings (in which 1 piece of ring is in the plate) 1 * Pack of Fixing Screws

    • Color: As picture shown
    • Brand: Yosoo
    • ASIN: B0793MC29G
    • UPC: 663862587418

  • Kreg PRS5000 Precision Router Lift

    Take control of your table-mounted router for quick, accurate, reliable, and repeatable setupsThe Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3⁄8" x 91⁄4" x 113⁄4" plate fits all Kreg router tables plus many popular brands) and accepts any of 20+ popular router models—without the need adapters or modifications—in a high-performance carriage that you raise and lower from above the table. With the Precision Router Lift, there’s no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well.Precision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full re...

    • Brand: Kreg
    • ASIN: B079YY98N1
    • UPC: 647096807863

  • JessEm Rout-R-Lift II Router Lift For 3-1/2" Diameter Motors, JessEm# 02310

    The new Rout-R-Lift II from JessEm Tool brings affordable precision to the entry-level router lift market. This model is designed for use with Porter-Cable 690/890 series, Bosch 1617/1618 series, Dewalt 610/618 series, and Craftsman 1754x/28190/ 28084 router motors.

    • Brand: JessEm
    • ASIN: B004U7B6IE
    • UPC: 838618000828

  • Bosch Cabinet Style Router Table RA1171

    • Color: Blue
    • Brand: Bosch
    • ASIN: B000H14DLY
    • UPC: 000346353549

  • Kreg PRS3040 Precision Router Table Insert Plate Levelers

    These Precision Router Insert Plate Levelers Are For The T20365 Kreg Precision Benchtop Router Table.

    • Color: As the picture shown
    • Brand: Kreg
    • ASIN: B000VRML54
    • UPC: 735090198848

  • MLCS 9338 All-In-one Router Plate Kit

    3/8" thick phenolic router plate supports any router. 2 removable rings give three different bit openings: (3-7/8", 2-5/8", 1-3/16"). Note: 1-3/16" opening is designed to hold Porter Cable (R) style guide bushings. The steel starting guide pin allows routing curved work. The plate is approximately 9" x 12" with pre-drilled table mounting holes. Includes magnets and adjusting screws for securing and leveling the plate. Also includes concentric rings on bottom of plate for easy alignment when installing your router.

    • Brand: MLCS
    • ASIN: B000GFWW96
    • UPC: 735090264956

  • Craftsman Router and Router Table Combo

    Router And Router Table Combo Is Powerfully Accurate The Craftsman router and router table combo merges user-friendly and powerful in a package that gives you everything you need but the lumber to get started on quality woodworking. The long-lasting router has a 1 3/4 horsepower motor that's robust enough to work through even hickory. The table gives you 334 square inches of smooth working surface on top of a sturdy cast aluminum base. This router and router table combo gives you a number of tools that let you make sure your work is clean and accurate. The cutting depths can quickly adjust-and lock-to microfine levels. The fences are adjustable, and extendable, too. The Craftsman router and router table combo gives you what you need to get started on setting up a woodworking shop Comes with router, 1/4" collet, wrench, table, fence, dust guard, two feather boards, miter gauge, three insert rings, hardware and a manual The 9.5 amp router has a 1-3/4 HP motor that runs at 27,000 RPMs The router is built with permanently lubricated and sealed ball bearings for longer motor life There are 334 square inches of space on the 11/16 in. thick laminate-surfaced tabletop Cutting depths can lock down in microfine adjustments The fence adjusts for proper bit clearance, with the infeed a...

    • ASIN: B00HJJ4QEQ
    • UPC: 733353676645

  • Rockler 4-Piece Router Table Accessory Kit

    Our 4-Piece Router Table Accessory Kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback. Two of the featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the table and keeps your work against the fence. Features: Dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up Table mounted featherboard which fits miter slot openings of 3/8 deep x 3/4" wide, can be secured anywhere along the miter track with the twist of the knob Fence-mounted featherboards slip into the accessory T-track, and are easily adjustable without tools

    • Brand: Rockler
    • ASIN: B0773PSR9K
    • UPC: 733175567640

  • Woodstock D4160 110-Volt Paddle Switch

    A recessed ON button protects against accidental starts and a large OFF paddle ensures fast shut down every time. The magnetic feature of this switch prevents tools from unexpectedly powering up after a power interruption. The switch remains OFF after power is restored and will start again only after the green ON button is pressed. Rated for 110V and 1/2 HP motors drawing up to 16 amps. This switch is a suitable replacement for similar metal & woodworking machine switches and can be surface mounted with two screws over a 7/8" wide x 1-7/8" tall cutout. Mounting screws not included.

    • Brand: Woodstock
    • ASIN: B005W17HYY
    • UPC: 769433498531

  • KREG Molded Router Table Insert Plate for Triton Routers

    This router table insert plate is made of compression molded phenolic material so that won't sag even under the weight of the heaviest of routers. Designed to use Level-Loc Reducing Rings that install in seconds and lock in place flush every time. They make setup changes simple by allowing you to quickly swap inserts rings for different bit sizes. The 4-hole plate for Triton will accommodate those same routers as well as the popular PC7518 with minor changes to enlarge the mounting hole.

    • Color: Black & Red
    • Brand: Kreg
    • ASIN: B01LVYLMXN
    • UPC: 647096806859

  • JessEm Rout-R-Plate Phenolic Router Table Insert Plate, JessEm# 03101

    JessEm Rout-R-Plate is a perfectly flat, rigid and durable mounting solution for reliable use in any router table application.

    • Brand: JessEm
    • ASIN: B00M42YV6Q
    • UPC: 838618000750

  • Kreg PRS3050 Twist-Loc Ring Set, 5-Piece

    The new 5-piece set of Level-Loc Reducing Rings gives more options for customers who have the Kreg Precision Router Table Insert Plate (#PRS3034, #PRS3036, #PRS3038 ), a Kreg router table equipped with one of those plates, or the Kreg Precision Router Table Lift (#PRS3000). The set includes rings with 3?4", 13?8", 15?8" and 21?8" openings, plus one "Blank" ring that customers can use to create their own custom-sized or zero clearance ring. The set comes also comes with a molded storage tray with slots to hold all five Level-Loc Reducing Rings and it has slots for the three rings that come with the Precision Router Table Insert Plate or Precision Router Table Lift. Each slot is marked with the opening size, making it easy to keep the rings organized.

    • Color: Red
    • Brand: Kreg
    • ASIN: B00D0REC7C
    • UPC: 647096805098

  • DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4” Inches – Cutter & Porter-Cable Template Guide

    Build your own table-mounted router and easily lift the router out of the table with the DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4" Inches - Cutter & Porter-Cable Template Guide. This router plate supports any router with a removable baseplate and gives you a mobile surface. It includes pre-drilled table mounting holes and magnets and adjusting screws for securing and leveling the plate. The removable rings allow for easy alignment when installing your router and offer three sizes. The underside is marked for centering the router prior to drilling, and the phenolic plastic material makes it easy to drill holes for a custom router fit. It will securely hold any router without flexing or warping when storing your router on top of the table.

    • Brand: DCT
    • ASIN: B077383KDP
    • UPC: 688295879183

  • Kreg PRS2100 Bench Top Router Table

    Kreg's freshly redesigned Precision Bench top Router Table (new item# PRS2100) now offers even more features that give it the capability of a full-size, industrial router table in a portable package. More than ever before, this makes the Precision Bench top Router Table a perfect routing solution, whether they want a router table to use on a job site or compact router table to use in the shop. You will notice the all-new router insert plate right away. It measures 9-1/4" x 11-3/4" x 3/8" to support even the biggest routers and it features Kreg's new Level-Loc Reducing Rings. These rings simply twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 1-3/16" (for use with Porter-Cable style guide bushings) and 2-5/8". More Level-Loc ring sizes are available in a set of 5 (sold separately). The plate also has laser-engraved markings on the underside that make it easy to mount any router and it comes with a set of Kreg's Precision Insert Levelers. The redesigned Precision Bench top Router Table also features Kreg's upgraded industrial-quality fence. It features all-new cam clamps that allow you to adjust the fence quickly and easily and lock it in place securely. Like before, the fence is made from anodized aluminum, has adjustabl...

    • Color: Multi
    • Brand: Kreg
    • ASIN: B00D0REC8G
    • UPC: 784497326125

  • Bosch 2610915125 Router Table Insert Set Genuine Original Equipment Manufacturer (OEM) part

    Includes (1) Insert Ring Set. New, Bulk Packed. Genuine OEM Replacement Part # 2610915125. Consult owners manual for proper part number identification and proper installation. Please refer to list for compatibility. Compatible With The Following Models: Bosch: RA1171, RA1180, RA1181

    • Brand: Bosch
    • ASIN: B002ENMULS

  • Big Horn 18100 Router Table Insert

    This 9 inch x 12 inch x 3/8 inch router table insert plate will accommodate heavy duty routers. Snap out rings of 3-7/8 inches, 2-5/8 inches, and 1-1/4 inches for small cutters and Porter Cable template guides.

    • Brand: Big Horn
    • ASIN: B001C4O9DC
    • UPC: 766565181003