• kauplus 4pcs SAE/Metric Stud Removal Set

    The Kauplus Metric Stud Puller Set Idea for removes and installs the metric studs in difficult work areas and offers the best professional extractors available, allows removal and installation of studs without damaging threads. The Stud Removal Socket Set comes with blow case and Made in Taiwan. Set contains: 6mm Removal Socket 3/8" Drive, 8mm Removal Socket 3/8" Drive, 10mm Removal Socket 1/2" Drive, 12mm Removal Socket 1/2" Drive. Use with a breaker bar, or ratchet, or wrench, not intended for use with any impact tools. Caution: Always wear safety goggles for prevent any personal injury or properly damage.

    • Brand: kauplus
    • ASIN: B07BDJZ57L
    • UPC: 682698742297

  • ABN Stud Extractor Set, Broken Stud Removal Socket 8-Piece SAE & Metric Stud Remover Set – Stud Puller Sockets

    Easily remove any stud whether it is threaded, broken, rusted, stripped, or smooth with the ABN Stud Removal Tool Kit 8-Piece Set. This stud extractor tool kit socket set removes manifold bolts, exhaust flange studs, and more. It will save the day when restoring your vehicle or even a tractor. To use, simply attach to your existing impact wrench or ratcheting wrench (not included) and turn to apply force. The smooth internal paws push into the fastener to remove the entire stud without damage. Reverse your ratchet to install a stud. This package includes (8) stud removal sockets - 1/4-inch, 5/16-inch, 3/8-inch, 7/16-inch, 6mm, 8mm, 10mm, and 12mm with 3/8-inch and 1/2-inch socket drives plus (1) carrying case for your convenience. Wrench required, not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

    • Brand: ABN
    • ASIN: B07FDLY1F3
    • UPC: 811498034183

  • OTC (7302-2) Brake Caliper Pin/Bolt Remover for Air Hammer

    The OTC 7302-2 allows for removal of inboard facing pins or bolts to be removed from the outboard side of the brake caliper or vehicle component. For caliper pin removal, simply back the pin bolt out half way and place the tool over the bolt shank to strike against the bolt head. Fits all sizes of pins or bolt shanks ranging from 1/4" (6 mm) to 5/8" (16 mm). Air hammer version. Designed to remove frozen caliper pins by allowing a striking force to be applied to the pin, not feasible without these tools, making removal quick and easy.

    • Brand: OTC
    • ASIN: B00EVPMYSQ
    • UPC: 731413574665

  • OTC 9852 Bearing Locknut Socket

    Bearing Locknut Socket Display.

    • Brand: OTC
    • ASIN: B000P72I58
    • UPC: 731413013997

  • OTC (1948A 33mm Budd Wheel Socket For Import Trucks With Dual Rear Wheels

    The OTC 1948A works on import truck Budd wheels. Its extra deep design lets you remove both nut and stud with just the one socket. Usable with a 1” square drive impact wrench. For Mack Midliners, White Volvo, and other import trucks with dual rear wheels.

    • Brand: OTC
    • ASIN: B00063YJQW
    • UPC: 777780909464

  • Sunex 8804m 1/2-Inch Drive 4 -Piece Metric Stud Puller Set

    Basic doesn't have to be ordinary. Bringing you an exciting range of resources, Sunex Tools hand tools put a new spin on handling fasteners. With the design and strength to work in most any situation, these tools will be right with you all of the way.

    • Brand: Sunex Tools
    • ASIN: B00063Z77W
    • UPC: 613364880449

  • Sunex 4pc 1/2" SAE Stud Puller Remover Standard 1/4" to 7/16" Sockets Set 8804

    Sunex 4pc 1/2" SAE Stud Puller Remover Standard 1/4" to 7/16" Sockets Set 8804Sunex 4pc 1/2" SAE Stud Puller Remover Standard 1/4" to 7/16" Sockets Set 8804 Set includes 1/2" Socket Sizes: 1/4", 3/8", 5/16', and 7/16" Sockets

    • Brand: Garage Door Turbo
    • ASIN: B07L9ZWP2J
    • UPC: 302706945648

  • OTC (6100) Standard TORX Socket Set - 12 Piece

    The OTC 6100 is a 12 piece set containing specialty bit sockets with Torx family profiles. Specifically, Torx bit sockets are represented in this small set. Specialty fasteners from the Torx family are used in many aspects of assemblies. The 6100 from OTC gives anyone a removal or installation solution for Torx profiles. Made with two piece construction S2 grade steel, one of the highest quality tool grade steels used in production, these bit sockets are designed for endurance. A natural finish ensures that these sockets won’t crack or peel like many chrome plated versions can. Includes: T10, T15, T20, T25, T27, T30, T40, T45, T47, T50, T55, and T60 sized sockets. NOTE: These high quality bit sockets will provide a lifetime of performance when used with hand tools. The warranty is voided if these bit sockets are ever used with impact tools - NO EXCEPTIONS! Determination of damage by impact tools is subject to OTC evaluation and discretion - NO EXCEPTIONS! Replacement bit sockets are available for sale.

    • Brand: OTC
    • ASIN: B0002NYC18
    • UPC: 956257421948

  • Sunex 7pc 3/8" SAE 6pt Universal Impact Sockets Set Tools Drive Swivel INCH 3654

    Sunex 7pc 3/8" SAE 6pt Universal Impact Sockets Set Tools Drive Swivel INCH 3654Sunex 7pc 3/8" SAE 6pt Universal Impact Sockets Set Tools Drive Swivel INCH 3654 Chrome Molybdenum alloy steel for long life Radius corner design extends the life of fasteners Heavy duty blow molder storage case Sizes Included are, 3/8 in. Universal Impact Socket - 312U 7/16 in. Universal Impact Socket - 314U 1/2 in. Universal Impact Socket - 316U 9/16 in. Universal Impact Socket - 318U 5/8 in. Universal Impact Socket - 320U 11/16 in. Universal Impact Socket - 322U 3/4 in. Universal Impact Socket - 324U

    • Brand: Garage Door Turbo
    • ASIN: B07LB2R97G
    • UPC: 302706945822

  • ABN Wheel Stud Installer Tool, Wheel Lug Bolt Remover – Broken Stud Extractor, Damaged Bolt Remover, Tire Stud Tool

    ABN's Wheel Stud Puller Installer Tool is equipped with a heavy duty thrust bearing to easily pull the new wheel studs into place. The flat bottom design ensures that the stud is fully seated and that no damage is done to the threaded portion of the stud. This car stud tool can fit studs up to 9/16" in diameter and is designed to make replacing damaged bolts, broken lug nuts, stripped and rusted studs a breeze. Pop the new stud from the back of the empty hole on your hub, slide on the ABN Installer Tool and tighten using an impact wrench or ratchet. This Bolt Installation Tool is designed with a rotating bearing that rides on the hub so that the bolt slides easily and accurately into place. This rotating design prevents damage by eliminating some friction that other methods can cause. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

    • Brand: ABN
    • ASIN: B07D9V5Y45
    • UPC: 811498030734

  • OTC 6295 Front End Service Set

    This kit includes five popular tools used for servicing Pitman arms, ball joints, and tie rods on most vehicles. Two Pitman Arm Pullers for large or small ball joint applications. Two Ball Joint Separators and three different Tie Rod Pullers.

    • Brand: OTC
    • ASIN: B0002SRH7O
    • UPC: 731413038440

  • OTC (6275) Tie Rod/Pitman Arm Adjusting Set

    The OTC 6275 is a tie rod/Pitman arm adjusting set. It consists of one Pitman arm and four tie rod tools in a blow-molded storage case.

    • Brand: OTC
    • ASIN: B0002SRGVG
    • UPC: 731413037139

  • OTC 9851 18" 8-Point Wheel Bearing Locknut Socket with Tool Board

    OTC 18 inch 8-Point Wheel Bearing Locknut Socket with Tool Board Wheel bearing locknuts are easy to remove or install with these specially designed sockets. They're made of high strength steel and resist rounding out. Measure from flat to flat to determine size of locknut, then consult chart to find the correct socket. This kit includes the following 8 Pt. The sockets 2-9/16 inch, 3 inch, 3-1/4 inch , 3-1/ 2 inch, 3-7/8 inch, 4-3/8 inch, 4-7/8 inch, 3-3/8 inch, 3-3/4 inch , 3-13/16 inch, 2-5/8 inch, 2-7/8 inch, 3-5/8 inch, 2-7/8 inch, 3-1/8 inch, 2-3/4 inch , and 4-1/ 2 inch. The sockets are designed for use with 3/4 inch square-drive manual tools only. Impact tool use voids sockets' warranty.

    • Brand: OTC
    • ASIN: B000KSTDBY
    • UPC: 731413013980

  • OTC 5081 S-Cam Air Brake Spring Tool

    Safely replace brake shoes on heavy-duty tractors and trailers. Simply hook the retaining spring loop and press down against the axle.

    • Brand: OTC
    • ASIN: B000GTMJUO
    • UPC: 782386206473

  • OTC (1944 Budd Wheel Socket Set - 5 Piece

    The OTC 1944 features sockets that work on the import truck Budd wheels. Their extra deep design lets you remove both nut and stud with just the one socket. Usable with a 1” square drive impact wrench. Metric sizes for Isuzu, Hino, Mitsubishi Fuso, and import trucks; fit front and rear axle wheels. 1-1/2” hex Budd wheel socket for American-made trucks with dual rear wheels. Includes OTC 1945A, OTC 1946A, OTC 1947A, OTC 1948A, and OTC 1949A, all in a blow molded organizer case.

    • Brand: OTC
    • ASIN: B005J3KONQ
    • UPC: 731413038266

  • OTC 7180 Universal Bearing Cup Installer

    Universal Bearing Cup Installer can be used to install cups ranging in size from 3-5/8 inch O.D. to 6-1/2 inch O.D. Simply turn the expander to the left or right to adjust the installer jaw diameter to the approximate same size as the bearing cup inside diameter. Finger tighten the nut to prevent the expander from moving once the jaw diameter has been set and install the bearing cup.

    • Brand: OTC
    • ASIN: B000O80ASU
    • UPC: 731413010071

  • OTC 5038 Brake Anchor Pin and Pin Bushing Service Set

    With this service kit there is no need to remove the bearing hub assembly just to replace the pins and bushings on 16-1/2" S-Cam trailer and tractor "Q" brake systems. Much less complicated and time consuming! Special tooling and our C-frame press get you past the hub assembly so you can do the job quickly and professionally without damaging other parts. Includes everything needed for removal and replacement.

    • Brand: OTC
    • ASIN: B000HI0Q04
    • UPC: 731413031816

  • OTC 9850 6-Point Wheel Bearing Locknut Socket with Tool Board

    6-point Wheel Bearing Locknut Sockets with Tool Board.

    • Brand: OTC
    • ASIN: B000OCIWVI
    • UPC: 731413013973

  • OTC (1907 Locknut Socket - 8 point, 3” Opening Size

    The OTC 1907 is specially designed and makes wheel bearing locknuts easy to remove or install. It’s made of high-strength steel and resists rounding out. Opening size is 8 point and 3”. NOTE: Socket is designed for use with 3/4” square-drive manual tools only. Impact tool use voids socket warranty.

    • Brand: OTC
    • ASIN: B000O824E8
    • UPC: 031113046258

  • OTC 4295 Wheel Stud Service Kit

    The "Wheel Stud Service Kit" is a mechanical tool that removes and installs wheel studs by pushing on the head of the wheel stud, eliminating the need for threaded adapters. This reduces the number of adapters required, minimizes the risk of damage to studs, and increases the ease of use for technicians. It is all done without removing the hub from the vehicle. The "Wheel Stud Service Kit" can remove and install up to 10 studs in 10 to 15 minutes in about half the time required for more expensive, competitive systems. This time saving kit translates directly into increased productivity and more revenue for the shop.

    • Brand: OTC
    • ASIN: B009B2M3YO
    • UPC: 731413567346