• Silverado Sierra 1500 lift block kits, KSP 3'' Rear Leveling Lift Block Kit and Extra Long Square Leaf Spring Axle U Bolts for GMC Chevy 1500 2WD/4WD

    ***KSP Performance ***Fitment:2007-2016 Silverado 1500 2WD/4WD 2007-2016 GMC Sierra 1500 2WD/4WDBrand storyKSP Performance rear tapered lift block kit will lift the rear of the truck 1-3 '' according to your truck mode and our application. Our block offers a superior lifted experience and maintain the factory ride quality. It can increase ground clearance; Levels the front with the rear, particularly when using a front leveling kit. Fit larger rims and tires. IT will be a Perfect solution for towing and hauling. Our Fabricated Steel block kit is lighter and stronger than casting block in the market. Solid aluminum rear lift blocks are light but not strong enough for offroad. Our Internal Reinforced cross design ensure stronger support than other sellers. The extended U bolts are made of high quality alloy steel with heat treatment to reach grade 8-150000 psi yield. It is much stronger than OE grade 4.5. Thread Pitch of our U bolts is 9/16'', not 14X1.5 from many sellers. 20mm height nuts and 3mm thick washers to support high torsion. Powder coated and zinc plated finished for long lasting.All of our updated technology and service to provide Lifetime Warranty and 100% Customer Satisfaction Guarantee. PLEASE NOTE: The height of our tapered block kit marked is actual size, Not alway...

    • Brand: KSP Performance
    • ASIN: B07DHN6M7H
    • UPC: 604270163627

  • ALLOYBOLTZ - SMALL BLOCK CHEVY SBC 265 283 305 307 327 350 400 STAINLESS ENGINE HEX BOLT KIT

    Give Your Small Block Chevy Engine a new look with our 205 Piece Stainless Steel Hex Bolt kit!! Our special intake washers are 1/8 thick. The bolts in this kit are made from 304 stainless steel. This Bolt Kit Fits All 265, 283, 302, 305, 307, 327, 350 , and 400 Chevy Engines.(Non-EFI). This is a complete high quality stainless steel hex bolt kit. The kit includes individually packaged and labeled component kits for the following items: Intake Manifold- Timing Cover- Water Pump- Oil Pan- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers- Crank Pulley- Fan Pulley - Carb Stud Kit The carb stud kit fits Carter, Edelbrock, or Holley Carbs. The studs have an internal hex used to install them in your intake manifold. If you are using a Quadrajet carb, just let us know with your payment and we will include a mounting bolt kit for you! Header Bolts (3/8-16 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These extra thick washers are designed to Clear Large Tube Headers.

    • Brand: Alloyboltz
    • ASIN: B073WPDQPY

  • Spectre Performance 42463 Fuel Pump Block-Off Plate with Bolts for Small Block Chevy

    Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

    • Brand: Spectre Performance
    • ASIN: B000BPURBQ
    • UPC: 089601424637

  • Fel Pro 260-1000 Small Block Chevy Overhaul Gasket Kit 55-79 283 327 350 SBC (Stock Gskt set)

    This listing is for a new small block Chevy Fel-Pro complete overhaul gasket kit. For '55-'79 V8 engines - 265, 283, 302, 307, 327, and 350s. Also fits '81-'85 light duty truck applications. Contains all gaskets shown. Famous Fel-Pro gaskets, great for stock to moderate performance rebuilds. Includes high quality gaskets including PermaTorque head gaskets (#7733PT2), good to 10.5:1 compression. Intake gasket #90314-1. Comes with both thick and thin front pan seals. Tough to beat this set considering the price!

    • Brand: Falcon Performance
    • ASIN: B01JN5VE7U
    • UPC: 639385356824

  • SBC Chevy Mini Starter High Torque Black 3HP 153 168 Tooth 350 400 Small Block

    This is a Conversion Starter for GM Engines Used as a Higher Torque Alternative to Delco Starters Originally Used. It Uses a 1.4kw 16584 With a Different DE Frame and Drive Pinion.

    • Brand: Precision Diesel and Auto Supplies
    • ASIN: B01I5LSCFU

  • Mr. Gasket 7631 Chrome Manifold EGR Block for Small Block Chevy

    Mr. Gasket chrome plated steel EGR block-off plates are designed for use on small block Chevy motors. These kits come with a block-off plate, gasket bolts, and washers--everything needed to make bypassing the factory EGR system quick and easy.

    • Brand: Mr. Gasket
    • ASIN: B003TESNQM
    • UPC: 084041026328

  • Proform 141-758 Black Crinkle Engine Dress-Up Kit with Red Chevrolet/Bowtie Logo for Small Block Chevy

    Engine Dress Up Kit: 289-400 Chevrolet Small Block; Black Crinkle

    • Color: Black
    • Brand: ProForm
    • ASIN: B000BN85Z8
    • UPC: 037995867585

  • Chevy GMC Big Block V8 Shorty Stainless Steel Headers 396 402 427 454 502

    Two Exhaust Headers with Gaskets and bolts Outlet Size: 2.85" Primary Tube Size: 1.65" square Number of O2 Sensor Locations: 0 Head Flange Thickness: 7/16" Outlet Flange Thickness: 3/8" Designed to fit the Chevrolet Big Block 396, 402, 454 V8 Engines. Hugs the block for a closer fit and extra clearance Headers features 8-2 light weight design. Designed to fit many vehicles and not specific to the ones below FITS: Chevy Chevelle 6.5L 396, 6.6L 402, 7.4L 454 Years: 1965-1973 Chevy El Camino 6.5L 396, 7.4L 454 Years: 1969-1974 Chevy Laguna 7.4L 454 Years: 1973-1975 Chevy Caprice 6.6L 402, 7.4L 454 Years: 1971-1974 Chevy Kingswood 6.6L 402, 7.4L 454 Years: 1971-1972 Chevy Camaro 6.5L 396, 6.6L 402 Years 1970-1972 Chevy Malibu 7.4L 454 Years 1973-1974 Chevy Impala 6.4L 402, 7.4L 454 Years 1971-1974 Chevy Bel Air 6.5L 396, 6.6L 402, 7.4L 454 Years 1968-1975 Chevy Biscayne 6.6L 402, 7.4L 454 Years 1971-1972 Chevy Brockwood 6.6L 402, 7.4L 454 Years 1971-1972 Chevy Townsman 6.6L 402, 7.4L 454 1972

    • Brand: TUNERBITS
    • ASIN: B01IRPFJCS
    • UPC: 717927557806

  • A-Team Performance 65K Coil, 7500 RPM HEI Distributor Compatible With Chevrolet CHEVY/GM GMC Small Block/Big Block SBC/BBC 262 265 267 283 302 305 307 327 350 383 400 SBC &396 427 454 BBC (SUPER CAP)

    A-Team Performance components offer a quality design at an affordable price. It features quick single-wire installation and adjustable vacuum advance canister to improve fuel economy. This HEI distributor for small block and big block Chevys with a 65,000 high voltage coil spark through 7,500 RPM. It is comprised of brass terminals, multi-polymer protective caps, a CNC Machined and polished aluminum shaft, and a chrome moly gear. In its interior, the 4-pin high performing module works together to produce a powerful spark and light the fuel mixture for an amazing performance. We offer a one-year warranty on this A-Team Performance HEI Distributor. Includes:1 x A-Team Performance 65K COIL Distributor Small Block/Big Block SBC/BBC Compatible With Chevrolet and GM (Super Cap) A-Team Performance 65K COIL Distributor Small Block/Big Block SBC/BBC Compatible With Chevrolet and GM (Super Cap) is sold exclusively by Southwest Performance Parts.

    • Brand: A-Team Performance
    • ASIN: B07L539TBV

  • Spectre Performance 4935 Aluminum Timing Cover Kit for Small Block Chevy

    The Spectre Timing Cover Kit is designed to protect components such as timing gears and chain or belt. This timing cover features a polished aluminum finish, and is engineered for optimum fit and function.

    • Color: Polished
    • Brand: Spectre Performance
    • ASIN: B000VVVERQ
    • UPC: 089601493503

  • American Automotive 3" Rear Suspension Lift Steel Blocks + Extra Long 12" Square Leaf Spring Axle U Bolts

    American Automotive steel lift blocks are stronger than aluminum. They are designed to increase rear load and towing capacity. American blocks absorb noise and vibrations, and are tapered for perfect pinion alignment. American Automotive u bolts are manufactured for maximum clamp force and are guaranteed for life. Made of cold drawn certified 1541 carbon steel OEM factory material with grade 8 hardware, American u bolts embody extreme strength and maintain OEM handling characteristics. These square u bolts are engineered to clamp 2.5 inch wide leaf springs and are 12 inch extra-long measured from the bottom of the bend to the bottom of the threads. American u-bolts provide an even distribution of pressure to protect against premature spring failure and unwanted movement. Allowances need to be made for all overloads and aftermarket leafs. 5 inch thread can be cut down to fit many applications. Lift Block Specs: 5" Long x 2.5" Wide, 3" Tall with 9/16th Pin. U-Bolt Specs: Square, 12" Length x 2.5" Width x 9/16 Thread Pitch

    • Brand: American Automotive
    • ASIN: B01GBUV876
    • UPC: 042485319826

  • CHEVY SMALL BLOCK COMPLETE PULLEY SET (LWP) - MACHINED

    Chevy Small Block Complete Machined Pulley Set. This machined finish aluminum complete pulley set is designed for Chevy small block engines that are running a long water pump (LWP). When you buy this complete pulley set you save $10.00 instantly. NOTE: Belts not included. Complete pulley set includes: 1) One machined finish aluminum single-groove key-way power steering pump pulley (P/N: HZ-8848). 2) One machined finish aluminum two-groove water pump pulley (P/N: HZ-9483), pulley nose & bolts (P/N: HZ-9489). 3) One machined finish aluminum two-groove crank pulley with bolts (P/N: HZ-9485, HZ-9924). 4) One machined finish aluminum single-groove alternator pulley set including fan & bolts (P/N: HZ-9487 HZ-8867).

    • Brand: CFR Performance
    • ASIN: B004N2KCVS

  • Chevy Small Block 1963-1982 V8 305 327 350 Race Exhaust Long Tube Headers

    Dual 4-1 Piping Design. 1.25" Inlet and 3" Outlet HP/TQ Gains of 10-15 FITS: Chevy Small Block 305/327/350 V8 Engines Years 1963-1982

    • Brand: TUNERBITS
    • ASIN: B01IRXC8T2
    • UPC: 717927557844

  • Assault Racing Products ARA3501538 Chevy Small Block Polylock Aluminum Rocker Arms 1.5 Ratio 3/8 Stud SBC

    Maximum Race Series Aluminum Rockers Chevy Small Block 1.50 ratio, 3/8" stud (23 degree stock/aftermarket heads) Made from high strength 6061-T6 aluminum extrusions, each piece is precision CNC machined and finished by hand to ensure that our customers receive the very best KMJ has to offer. Assault Racing stud mount aluminum rockers are specially machined to allow for larger springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. As with other Assault Racing products, these are in-stock for immediate delivery. All Assault Racing aluminum rockers come complete with poly locks at no additional cost. Designed to meet the demands of most high-lift roller camshaft profiles Specially machined to accommodate larger valve springs and retainers SAE-52100 Full complement precision needle and cage roller bearings Anodized for a superior finish and to reduce operating temperatures CNC machined pushrod cups and heat-treated Cr40 roller tips Internal oiling system for long lasting performance Clears most centerbolt covers (depending on the inside of the cover). Applications: 262 (1975-76) 265 (1955-57) ...

    • Color: 1.5
    • Brand: Assault Racing Products
    • ASIN: B01BPPBD4U

  • Elgin SSR-868RS Stainless Steel Roller Rocker Arm (Set of 16), 16 Pack

    Elgin Pro stock high performance stainless steel roller rocker arms for Chevy Big block. 1.72: 1 ratio with 7/16" stud diameter. Set of 16 rocker arms and poly locks.

    • Brand: Elgin Industries
    • ASIN: B00CB3IUQK
    • UPC: 013122333727

  • Spectre Performance 42473 Fuel Pump Block-Off Plate with Bolts for Big Block Chevy

    Speed By Spectre, The 400mph company. Rooted in racing, we design and build every product with the same goal in mind; the best performance in the market... proven on the racetrack! All Speed By Spectre products are designed to perform as good as they look using high quality materials and engineered for optimum fit and function.

    • Brand: Spectre Performance
    • ASIN: B000BPZ42S
    • UPC: 089601424736

  • Small Block Chevy Stainless Engine Bolt Kit

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.Kit includes:Intake manifold boltsTiming cover boltsOil pan boltsShort water pump boltsLong water pump boltsTH350/400 transmission pan boltsExhaust header boltsWater neck bolts, 1955-1965Water neck bolts, 1966-1986Flywheel cover bolts

    • Brand: Speedway Motors
    • ASIN: B075NPPBKX

  • For Small Block Chevy Nova SBC LS1-LS6 LSX Swap Engine Stainless Steel Long Tube Exhaust Header

    Our 4-1 Long Tube off-road headers for 1967-1974 Chevy Pontiac Buick and Oldsmobile chassis swapped to the new LS based engines are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the Small Block LS1 and LS6 engines (will also fit truck engines swapped to LS1/LS6 style cylinder heads). This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Set of Exhaust HeadersCompatible with:For LS V8 Engine Swaps only

    • Brand: Auto Dynasty
    • ASIN: B00VN16GDK

  • Performance Chevy/gm SBC BBC Small Block/big Block 65k coil 7500RPM Hei Distributor 350 454 302 V8

    Product Description: This is a new HEI distributor for small block/big block Chevys with 65,000V high voltage coil spark through 9,000 RPM, upgraded for racing application. Includes coil and module. Full CNC machined aluminum body. Applications include: 283, 305, 307, 327, 350, and 400 small blocks, and 396, 427, and 454 big blocks. Red cap. Ready to run. The High Performance components offer a quality design at an affordable price.We offer a Two-year warranty on this High Performance HEI Distributor. Compatible: 1973-1955 Chevrolet Bel Air 1957-1955 Chevrolet One-Fifty Series ,Two-Ten Series 1958      Chevrolet Del Ray 1960-1955 Chevrolet Truck 1962      Chevrolet P10 Series 1962-1961 Chevrolet ,P30 Series 1962-1966 Chevrolet Suburban 1967      Chevrolet K20 Panel 1968-1962 Chevrolet Chevy II 1972-1958 Chevrolet Biscayne ,Brookwood 1972-1962 Chevrolet Townsman 1972-1968 Chevrolet P20 Van ,P30 Van 1972-1969 Chevrolet Kingswood , Nova 1973      Chevrolet Laguna 1973-1955 Chevrolet Corvette 1973-1959 Chevrolet El Camino , Impala 1973-1961 Chevrolet C10 Pickup ,C20 Pickup ,C30 Pickup ,K10 Pickup ,K20 Pickup 1973-1964 Chevrolet Chevelle , Malibu 1973-1966 Chevrolet Caprice 1973-1967 Chevrolet Camaro 1973-1968 Chevrolet C10 Suburban , C20 Suburban , G10 Van , G20...

    • Color: Red
    • Brand: AcPulse
    • ASIN: B072MHVZXJ
    • UPC: 606794711681

  • Assault Racing Products A6186 Small Block Chevy Finned Polished Aluminum Short Style Valve Covers 58-86 Retro SBC

    This is a new set of classic finned style aluminum valve covers. Applications include 1958-1986 small block Chevy engines 283, 305, 327, 350 and 400. Short style, great for stock valve train setups! Finned top Polished aluminum Short style - 3 3/16" height1 1/4" breather hole per coverBaffles includedStainless bolts includedGrommets includedThick cast aluminum

    • Color: Polished
    • Brand: Assault Racing Products
    • ASIN: B00S75FPZ0