• BEMONOC High Torque PMDC Right Angle Gear Motor 12V Reversible 50 RPM (Right Gear-Box) with Threaded Shaft

    This is a brand new electric gear motor that has extremely high torque to handle many heavy-load applications, which can change shaft rotation direction while the wiring positive and negative be changed.It's also have addition two characteristics: (1)With self-locking, the output shaft can't rotation when switch off, that is self-locking. (2) Gearbox output shaft and motor shaft are come to be a rectangle, it's widely used in various of occasions that require special install size. Usage: door and windows, car, boat, coffee roaster, electric awning, bbq, home appliance,elect.

    • Color: Black
    • Brand: DC GEAR MOTOR
    • ASIN: B01GJ4VPH2
    • UPC: 600984286843

  • Alltrax Controller - Club Car Controller - Throttle (5k-0): SR-48400 (SERIES Carts ONLY): 400 Amp 48V- Stock Speed & 20% More Torque- CLICK"Sold by: D&D Motor Systems" FOR LOWEST PRICE

    Performance Specifications Vehicle Speed : 14 MPH Torque Enhancement : +20 % 1. Torque Focus 2. Enhanced thermal characteristics over the standard factory controller and therefore, much less likely to burn up. Note: *** Vehicle performance specs are compared to the standard factory performance. Several factors can effect the performance. Some are battery conditions; tire size, tread type and air pressure; and varying environmental conditions. Standard factory speeds normally run between 12 - 14 MPH!!! All vehicle speeds noted are calculated on flat ground. Adding Larger tires normally adds between 2-3 MPH. DISCLAIMER - BY PROCURING THIS ELECTRIC MOTOR, THE CUSTOMER AGREES THAT THEY HAVE ANSWERED YES TO ALL OF THE QUESTIONS LISTED ABOVE. OTHERWISE NO PRODUCT LIABILITY CAN BE PROVIDED OR ASSUMED. IF YES IS ANSWERED TO THE ABOVE QUESTIONS, THEN THE APPLICATION IS APPROVED BY D&D.

    • Color: Red Option (Blue Controller)
    • Brand: D&D Motor Systems
    • ASIN: B072P1KKW7

  • uniquegoods 6V 12V 24V Digital Display LED DC Motor Speed Controller PWM Stepless Speed Control Switch HHO Driver - Black CCM5D

    Features: CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions. The display range of 3-digit LED display is "000"-"100". (For example, displayed "066" as the picture 1, it means that the PWM output duty cycle is 66%.) Adjustable speed range is 0%-100%. Suitable for the DC motor (or DC load) within 5A, Peak current 8A. Incorporate a push key. Push closed, and then push open. Operating instruction:  Before you attempting to wire the controller, make sure power is off. WARNING: DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS.THIS WILL DAMAGE THE CONTROLLER. TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR. 1. Connect wires refer to the "wiring diagram" (NO.6 picture). 2. Turn on the power, and adjust the potentiometer. 3. The LED display displays the PWM output duty cycle. 4. Push the key, the controller closed, push it again, the controller open. Package Including: 1 x DC Motor Speed Controller

    • Color: Red
    • Brand: uniquegoods
    • ASIN: B00QLYO7XU
    • UPC: 605145000665

  • 12V-40V 10A PWM DC Motor Speed Controller, High Torque & Low Heat Radiation Frequency Controller with Knob-High Efficiency, Variable Speed Regulator Governor Switch

    Working Voltage: DC 12V - DC 40V Control Power: 0.01 - 400W Rated Current: 8A Max Current: 10A PWM Frequency: 13 khz Static Current: 0.02 A ( Standby ) PWM Duty Cycle: 10% -100% PWM Frequency: 13 khz   The DC Motor Speed Controller allows controlling speed of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. The circuit also includes a 10A fuse, with reverse connection of power supply and control voltage over-voltage protection function.   Package Including: 1 x Speed Controller

    • Brand: UMLIFE
    • ASIN: B07H2ZK7D7
    • UPC: 701715556027

  • RioRand 12V-40V 10A PWM DC Motor Speed Controller with Knob-High Efficiency, High Torque, Low Heat Generating with Reverse Polarity Protection, High Current Protection

    RioRand 12V-40V 10A PWM DC Motor Speed Controller w/ Knob--High Efficiency, High Torque, Low Heat Generating with Reverse Polarity Protection, High Current Protection From left to right they are Motor-, Motor+, Power-, Power+ Features: Control the speed of a DC motor with this controller High efficiency, high torque, low heat generating With reverse polarity protection, high current protection Size (L x W x H ): Approx. 73 x 60 x 27 mm Material: Plastic, metal Package Including: 1 x RioRand Speed Controller

    • Color: 12V-40V-10A-400W
    • Brand: RioRand
    • ASIN: B007TH4EN6
    • UPC: 645195917568

  • Golf Cart Motors - EZGO Golf Cart Motor & Controller for Speed : Series (ITS) Throttle : 19-21 mph & +5% Torque - 170-006-0001 Motor w/ 400 Amp Controller (Blue Option) includes Solenoid & Wire kits

    Performance Spec.'s Vehicle Speed : 21 MPH Torque Enhancement : +5 % Motor RPM : 4850 Peak HP : 8.6 1. Speed Focus 2. All wiring throughout the golf cart must be upgraded to a minimum of 4 AWG. We recommend our Wire Upgrade Kit for most vehicle types. If you do not see a Wire Kit offered in the "Other Recommended Items" section above, go to our links page for recommended suppliers. 3. Must upgrade to a heavy duty Solenoid. We recommend our Solenoid Kit (kit includes solenoid, resistor, diode and mounting brackets). 4. Must upgrade to a heavy duty F&R Switch. Note: *** Vehicle performance specs are compared to the standard factory performance. Several factors can effect the performance. Some are battery conditions; tire size, tread type and air pressure; and varying environmental conditions. Standard factory speeds normally run between 12 - 14 MPH!!! All vehicle speeds noted are calculated on flat ground. Adding Larger tires normally adds between 2-3 MPH. If you do not see the performance you require, please call (315) 701-0635. We often are capable of making non-standard motors through our engineering department. DISCLAIMER - BY PROCURING THIS ELECTRIC MOTOR, THE CUSTOMER AGREES THAT THEY HAVE ANSWERED YES TO ALL OF THE QUESTIONS LISTED ABOVE. OTHERWISE NO PRODUCT LIAB...

    • Color: Blue Option (Blue Motor & Controller)
    • Brand: D&D Motor Systems
    • ASIN: B06Y17Q52M

  • Alltrax Controller - EZGO PDSController : XCT-48500 (Regen Carts ONLY) : 500 Amp for 36 & 48V - 20-22 mph & 30% More Torque vs Stock - CLICK"Sold by: D&D Motor Systems" FOR LOWEST PRICE

    Performance Specifications Vehicle Speed : 14 MPH Torque Enhancement : +30 % 1. Torque Focus 2. All wiring throughout the golf cart must be upgraded to a minimum of 4 AWG. We recommend our Wire Upgrade Kit. 3. Must upgrade to a heavy duty Solenoid. We recommend our Solenoid Kit (kit includes solenoid, resistor, diode and mounting brackets). 4. This controller has an extended housing. From end to end, it measures about 10 inches to the end of the Buss Bar. 5. This controller is fully epoxy coated and does not need to be covered. 6. Enhanced thermal characteristics over the standard factory controller and therefore, much less likely to burn up. 7. This is an economical hunting buggy solution. 8. If your application has rolling or very steep hills along with the vehicle having a lift kit, big tires, a backseat or a utility bed, then you will most likely burn up 4 vehicle parts. Those parts include the motor, solenoid, wires and *forward & reverse switch (*series carts only). If the operator does not upgrade those parts to the level that is required, then D&D Motor Systems will not be held responsible for any damages, injuries or death that may occur. Note: *** Vehicle performance specs are compared to the standard factory performance. Several factors can effect the perfo...

    • Color: Green Option (Blue Controller)
    • Brand: D&D Motor Systems
    • ASIN: B071CGD35W

  • Alltrax Controller - Yamaha G29 Golf Cart Controller : XCT-48300 (Regen Carts ONLY):300 Amp 48V - 14 mph & 5% More Torque vs Stock - CLICK Sold by: D&D Motor Systems FOR LOWEST PRICE

    Performance Specifications Vehicle Speed : 14 MPH Torque Enhancement : +5 % 1. Torque Focus 2. Enhanced thermal characteristics over the standard factory controller and therefore, much less likely to burn up Note: *** Vehicle performance specs are compared to the standard factory performance. Several factors can effect the performance. Some are battery conditions; tire size, tread type and air pressure; and varying environmental conditions. Standard factory speeds normally run between 12 - 14 MPH!!! All vehicle speeds noted are calculated on flat ground. Adding Larger tires normally adds between 2-3 MPH. DISCLAIMER - BY PROCURING THIS ELECTRIC MOTOR, THE CUSTOMER AGREES THAT THEY HAVE ANSWERED YES TO ALL OF THE QUESTIONS LISTED ABOVE. OTHERWISE NO PRODUCT LIABILITY CAN BE PROVIDED OR ASSUMED. IF YES IS ANSWERED TO THE ABOVE QUESTIONS, THEN THE APPLICATION IS APPROVED BY D&D.

    • Color: Red Option (Blue Controller)
    • Brand: D&D Motor Systems
    • ASIN: B0718WZZFS

  • TWTADE 12V-40V 10A PWM DC Motor Speed Controller with Knob-High Efficiency, High Torque, Low Heat Generating with Reverse Polarity Protection, High Current Protection MX10A40V

    Important: This is DC motor controller, please make sure the input voltage is from DC power, do not use home 220V AC, otherwise it will burn out. The DC Motor Speed Controller allows controlling direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. Specification: 100% brand new and high quality. Input supply voltage: DC 12V-40V. The maximum output power: 400W. The maximum continuous output current :8A. The overload and short circuit protecting current is 10A. Static Current:0.02 A ( Standby ). PWM frequency: 13kHz. Duty Cycle adjustable: 10%-100%. The operation environment temperature:-20℃-40℃. (L*W*H): 6cm x 5.5cm x 2.8cm/2.36"x 2.16"x1.10"(approx). Net weight: 69g . WARNING: DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS.THIS WILL DAMAGE THE CONTROLLER.

    • Color: 10A 12-40V
    • Brand: TWTADE
    • ASIN: B07D1LQTY7
    • UPC: 729270397602

  • Golf Cart Motors - Club Car Motor & Controller Speed & Torque Regen Combo for IQ carts - 16-22 mph - +70%Torque - 170-502-0002 Motor w/ 500 Amp Controller(Orange Option)- includes Solenoid & Wire kits

    Performance Spec.'sVehicle Speed : 21 MPH Torque Enhancement : +70 % Motor RPM : 4850 Peak HP : 11.4 1. Beware: This motor will not fit into this golf car without fabrication work or at least a 3 inch lift kit being attached. This is because the wheel base on this style golf car is too narrow and the motor is too long. Shock may need to be disconnected, just to be installed.2. Speed & Torque Focus3. All wiring throughout the golf cart must be upgraded to a minimum of 4 AWG. We recommend our Wire Upgrade Kit for most vehicle types. If you do not see a Wire Kit offered in the "Other Recommended Items" section above, go to our links page for recommended suppliers.4. Must upgrade to a heavy duty Solenoid. We recommend our Solenoid Kit (kit includes solenoid, resistor, diode and mounting brackets). 5. This controller has an extended housing. From end to end, it measures about 10 inches to the end of the Buss Bar. 6. Enhanced thermal characteristics over the standard factory controller and therefore, much less likely to burn up. 7. This is an economical hunting buggy solution. 8. Excellent for hunting Buggy and lifted vehicle applications.Note: *** Vehicle performance specs are compared to the standard factory performance. Several factors can effect the performance. Some are battery...

    • Color: Orange Option (Blue Motor & Controller)
    • Brand: D&D Motor Systems
    • ASIN: B06XYW1SBN

  • Golf Cart Motors - Club Car Motor & Controller High Torque Combo for Series(5K-0) Carts - 15 mph & +70% Torque - 170-004-0002A Motor w/ 500 Amp Controller(Green Option) - includes Solenoid & Wire kits

    Performance Spec.'s Vehicle Speed : 15 MPH Torque Enhancement : +70 % Motor RPM : 3450 Peak HP : 10.2 1. Torque Focus 2. All wiring throughout the golf cart must be upgraded to a minimum of 4 AWG. We recommend our Wire Upgrade Kit for most vehicle types. 3. Must upgrade to a heavy duty Solenoid. We recommend our Solenoid Kit (kit includes solenoid, resistor, diode and mounting brackets). 4. This controller has an extended housing. From end to end, it measures about 10 inches to the end of the Buss Bar. 5. This is an economical hunting buggy solution. 6. Currently the highest torque motor in the aftermarket! Excellent for hunting Buggy and lifted vehicle applications. 7. Beware: This motor will not fit into this golf car without fabrication work or at least a 3 inch lift kit being attached. This is because the wheel base on this style golf car is too narrow and the motor is too long. Shock may need to be temp. disconnected. 8. Must upgrade to a heavy duty F&R Switch. Note: *** Vehicle performance specs are compared to the standard factory performance. Several factors can effect the performance. Some are battery conditions; tire size, tread type and air pressure; and varying environmental conditions. Standard factory speeds normally run between 12 - 14 MPH!!! All vehic...

    • Color: Green Option (Blue Motor & Controller)
    • Brand: D&D Motor Systems
    • ASIN: B06Y1RFQW4

  • DC Speed Controller, DROK DC 6-90V 15A DC Motor Controller, Universal 0.01-1000W 16kHz PWM Stepless Brushed Motor Control, Variable Speed Control Generator Kit with Output Voltage LED Display

    Product Parameters: Voltage range: DC 6-90V (cannot be used in AC) Current range: Rated current 8A (max. current 15A); Quiescent Current 0.005A (standby mode) Power range: 0.01-1000W PWM frequency: 16kHz Fuse specification: 15A ceramic arc fast-melting fuse. Polarity of motor: No need to distinguish the positive side and the negative side when you connect the motor and you can adjust the order of the wires to change the direction. Using Instruction & Considerations: 1. Please connect an external DC 6-90V power when working, otherwise it will burn. 2. The input of the DC motor speed regulator must be DC input, cannot be connected to AC input (e.g. Household AC 220V), otherwise, the motor speed regulator will be burnt. 3. The positive side and the negative side of DC power supply cannot be reversed connected, or the motor speed regulator will be damaged. 4. No need to distinguish the positive side or the negative side of the motor. When the operating direction cannot meet your expectation, you can adjust the order of the wires to change the direction. 5. Adjusting the potentiometer knob can change the duty ratio of the output of the motor speed regulator, and then change the speed of the motor. Package Includes: 1* DC Motor Speed Controller

    • Brand: DROK
    • ASIN: B073Z7PB5G

  • Kingsdun Small Torx Screwdriver Set with T5 T6 T7 T8 T9 T10 T15 T20 Security Driver Bits for Macbook/Xbox one/Xbox/Controller/PS3/PS4/HDD/Computer Repair

    Kingsdun New Small Torx Screwdriver Set Professional Screwdriver Repair Tool Kit for Mobile phone, PAD, PC Great for cell phone, PDA, PC,Macbooks,xbox one,xbox 360 controller and other applications. Ideal for the preservation and maintenance of precise work and the optics facilities, such as precise watches, mobile phones, television, mobile phone, PDA, PC & other applications. Screwdriver Kit Details:  1X T5, T6, T7, T8, T9,T10,T15,T20 Warranty: 45 days money-back & 18-month warranty. Any questions you have, please don't hesitate to contact us. We will get you back within 24hours.

    • Color: Small Torx Set
    • Brand: Kingsdun
    • ASIN: B078RLVMSK
    • UPC: 740120842585

  • RioRand™ Upgraded 6V-90V 15A DC Motor Pump Speed Controller

    Specifications: Working Voltage: DC 6V - DC 90V (Ultra wide working voltage) Control Power: 0.01 - 1000W(Max current :15A) Static Current: 0.005A ( Standby) PWM Duty Cycle: 0% -100% PWM Frequency: 15Khz Voltage control:0-5v(Voltage -mode control ,can use PLC to control the motor speed directly) With power reverse connection protection, has complete protection from overvoltage, 20A to quickly fuse the ceramic fuse ,can use PLC voltage to control directly. Package Including: 1 x RioRandTM Speed Control 1x RioRandTM Speed Control Switch Notice:If the item you received differs from the picture or if there is any issue with your purchase, please just contact us via sending us an email so we can solve the issue in time

    • Color: 6-90V-15A
    • Brand: RioRand
    • ASIN: B00F839VNQ
    • UPC: 606094322617

  • Syntus 63 in 1 Precision Screwdriver Set with 57 Bit Magnetic Screwdriver Kit Electronics Repair Tool Kit for iPhone, Tablet, Macbook, Xbox, Cellphone, PC, Game Console, Black

    Syntus 63 in 1 Precision Screwdriver SetThe ultimate high-performance bit kit includes essential parts for repairing smartphones, tablets, and PCs including iPhone, iPad, MacBook Air, and MacBook Pro, as well as gaming consoles and controllers from Nintendo, PlayStation, or XBox.57-Bit Driver SetHere come all the screwdriver bits you need to repair electronics, smartphones, tablets, computers, game consoles, and wearables in one handy toolkit. Opening ToolA triangle plectrum and a plastic stick are included for prying, sliding and separating.High-performance KitCrafted with S2 shock resistant tool steel which is solider than normal chrome-vanadium steel, CR-V, in the market.57 bits in the following sizes:Nut Driver Size: 2.5 3.0 3.54.0 4.55.0 5.5 PH2Hex Size: 0.7 0.9 1.3 1.5 2.0 2.5 3.0 4.0 4.5 5.0 6.0 mmTorx Size: T2 T3 T4 T5 T6 T7 Torx Security: T8 T9 T10 T15 T20Flathead Size: 1.0 1.5 2.0 2.5 3.0 3.5 4.0 mmPhillips Size: PH000 PH00 PH0 PH1 PH2Pentalobe Size: 0.8 1.2 1.5 mmTri-point Size: Y0.6 Y2.0 Y2.5Triangle Size: 2.0 3.0 mmSpanner Size: 2.6 3.0 mmSquare Size: SQ0 SQ1 SQ2Additional bit: 2.5 (Useful for disassembling the inner plate for iPhone 4, 4s, 5, 5s, 6, 6plus, 7, 7plus)Package Content:57 * bit1 * aluminum driver1 * extension rod1 * flexible shaft extension1 * standard 1...

    • Color: Black
    • Brand: Syntus
    • ASIN: B071PB4RPV
    • UPC: 610731319663

  • 48V 72V 3000W Brushless DC Sine Wave Controller + LED voltage display Twist Throttle with Electric Switch +Brake Lever+ Torque arm for 72V 3000W Electric Bicycle Motor/E-bike Kit

    48V 72V 3000W eBike Electric Components Parts Parts Including: 48V 72V 3000W DC Sine Wave Controller (48V or 72V Universal) LED voltage display Twist Throttle with Electric Switch Brake Lever Torque arm for 72V 3000W E-bike Kit You get all parts to install your ebike, and only need a motorized wheel. Technical Data: Rated current:60A Rated voltage:DC48V/72v Function:Three speed/Regen/CA display/low level brake Color: Silver Certification:CE Applicatoin: Max. 72V 3000W Electric Bicycle Motor/E-bike Kit.

    • Brand: NBPower
    • ASIN: B06WRWDZJG

  • STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

    This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications. Important notice: Some customers reported they bought this model from other seller under this listing, but found much of difference with our description(no connector and shorter leads). We highly recommend you report this problem to Amazon if you have same experience. If you are a new buyer, please pay attention to our ID is "STEPPERONLINE", and our P/N is "17HS19-2004S1". Electrical Specification: * Manufacturer Part Number: 17HS19-2004S1 * Motor Type: Bipolar Stepper* Step Angle: 1.8 deg. * Holding Torque: 59Ncm(83.6oz.in)* Rated Current/phase: 2.0A* Phase Resistance: 1.4ohms* Inductance: 3.0mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 48mm * Shaft Diameter: 5mm * Shaft Length: 24mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 1m with connector * Weight: 390g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor...

    • Color: As Shown
    • Brand: STEPPERONLINE
    • ASIN: B00PNEQKC0
    • UPC: 191388825313

  • B&M 70244 Transmission Accessories Converter Lockup Controller Automatic Transmission Torque Converter

    A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator

    • Brand: B&M
    • ASIN: B003TPMOFW
    • UPC: 196957024418

  • ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY, DS3218MG,Control Angle 270°

    High performance digital standard servo, can be common use in robots, mechanical arms, climbing cars and remote control toys. The main features are fast heat dissipation,big torque high compatibility ,sensitive and responsive ect. Good choice for university professors and students who are interested in developing software for robot parts. Features: - High-precision metal gears with hard anodizing - CNC aluminium middle Shell, - water proof rubber seals screws Sepcification: Brand: DSSERVO Item: DS3218MG Stall Torque (5V): 19 kg/cm (263.8oz/in) Stall Torque (6.8V): 21.5 kg/cm (298.5 oz/in) Dead band: 3μs Speed : 0.16 sec/60°(5V) / 0.14 sec/60°(6.8V) Operating Voltage: 4.8 ~ 6.8 DC Volts Weight: 60 g (2.12 oz) Motor Type: DC Motor Gear Type: Copper & Aluminum Working frequence: 1520μs / 333hz CE Certification: Yes Size: 40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in) Package Included: 1 x DS3218MG Digital Servo 1 x 25T Adjustable metal servo arm20KG Control Angle 180°,please search ASIN: B0769DFJVK25KG Control Angle 180°,please search ASIN: B07GJ6ZCVY25KG Control Angle 270°,please search ASIN: B07GK1G5FV20kg Control Angle 270°(PRO Version), ASIN:B07KTSVSSJ 60kg Control Angle 270°,Please search ASIN:B07KTSCN4J

    • Brand: ANNIMOS
    • ASIN: B076CNKQX4
    • UPC: 601263451471

  • Redrock Micro microRemote Handheld Fingerwheel Bundle for Camera and Lens, Includes FlexCables, microRemote Fingerwheel Controller, Torque motor

    Single Operator The Redrock microRemote Handheld Bundle is a perfect solution for controlling focus for a single operator. The Torque motor attaches to your rig and fits to your geared lens. The fingerwheel attaches to your handgrip or other part of your rig for smooth controlled focus pulls. The basestation coordinates the fingerwheel and motor and automates lens calibration among other advanced controls. Extremely Affordable The microRemote Handheld Bundle is most often used on a shouldermount-style configuration (such as the Redrock Field Cinema Deluxe Bundle) with the fingerwheel attached to one of the handgrips. This bundle is lightweight, compact and extremely affordable. Features Works with virtually all cameras and lenses Precision movement fingerwheel All lenses map to an expansive 270 degrees of rotation Can be alternately used to control zoom or iris (or multiple units can be combined to simultaneously control more than one lens setting) Automatic lens calibration (with manual calibration option) Powerful Redrock Torque motor works with cinema and still lenses Optional handwheel mimics a traditional follow focus unit for additional control options All-digital system Note Cables are included with this bundle. External power such as a p-tap power source is also required ...

    • Brand: Redrock Micro
    • ASIN: B01L0YN9PM